How to service and repair the turn signal switch on 2007 Ford F-250 Super Duty?

Service and repair operations on the turn signal switch need the supplemental restraint system (SRS) to be depowered first. Use a punch to activate the ignition switch lock cylinder release tab during the procedure while keeping the key in the RUN position. You need to twist the tilt wheel handle to take out the equipment which is available. Start by detaching the power supply wires from the multi-function switch then unfasten the screws which hold the steering column shrouds and multi-function switch in place. The installer should tighten multi-function switch screws to 3 Nm (27 inch lbs.) after reinstalling before proceeding with the reverse installation steps. The supplemental restraint system (SRS) should receive a new power source.

OEM 2007 Ford F-250 Super Duty Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Turn Signal Switches found

View related parts
2007 Ford F-250 Super Duty Multifunction Switch
Part Number: 7C3Z-13K359-AA
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Turn Signal & Combination Lever; Combination Switch; Multi Purpose Switch
- Manufacturer Note: BLACK
- Base No.: 13K359
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.3 x 4.6 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7C3Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL
View related parts
2007 Ford F-250 Super Duty Combination Switch
Part Number: 4C3Z-13K359-AAA
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Hazard Flasher Switch; Multi-Function Switch; Multi Purpose Switch; Turn Signal & Hazard Switch
- Base No.: 13K359
- Item Weight: 0.90 Pounds
- Item Dimensions: 10.5 x 4.5 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-13K359-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford F-250 Super Duty Submodels:
- Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 7.3 L DIESEL

2007 Ford F-250 Super Duty Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford F-250 Super Duty Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford F-250 Super Duty Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford F-250 Super Duty Turn Signal Switch Parts Questions & Experts Answers

Q: How to service and repair the turn signal switch on 2007 Ford F-250 Super Duty?
A: Service and repair operations on the turn signal switch need the supplemental restraint system (SRS) to be depowered first. Use a punch to activate the ignition switch lock cylinder release tab during the procedure while keeping the key in the RUN position. You need to twist the tilt wheel handle to take out the equipment which is available. Start by detaching the power supply wires from the multi-function switch then unfasten the screws which hold the steering column shrouds and multi-function switch in place. The installer should tighten multi-function switch screws to 3 Nm (27 inch lbs.) after reinstalling before proceeding with the reverse installation steps. The supplemental restraint system (SRS) should receive a new power source.