How to service the rear window wiper motor on 2007 Ford Focus?

A proper servicing position for the rear window wiper motor requires the wiper motor to be placed in park. Start by lifting the cover while gradually loosening the front window wiper pivot arm nut two times before tightening it to 20 Nm (15 lb-ft) during reinstallation. After raising the rear window wiper pivot arm and freeing it from the taper using side movement you should remove the nut and pivot arm. Detach the liftgate trim panel screws before cutting off the wiper motor electrical connection. Take out the bolt and ground lead then displace the rear window wiper motor mounting plate by removing its three mounting bolts while tightening the bolts to 8 Nm (71 lb-in) during reinstallation. Verify that the wiper motor sits at park before unfastening the mounting plate's three bolts while extracting the rear window wiper motor from its location through reinstallation with 8 Nm (71 lb-in) torque. Execute the reverse version of your removal steps to accomplish the installation process.

OEM 2007 Ford Focus Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Wiper Motors found

View related parts
2007 Ford Focus Motor & Linkage Part Number: 6S4Z-17508-AA
Product Specifications
- Other Name: Wiper Motor And Drive; Wiper Linkage; Wiper Motor And Drive Assembly; Wiper Motor
- Manufacturer Note: Windshield Wiper, Includes Motor And Linkage
- Base No.: 17508B
- Item Weight: 3.30 Pounds
- Item Dimensions: 8.2 x 5.8 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6S4Z-17508-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- S, SE, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2007 Ford Focus Wiper Motor Part Number: 7S4Z-17508-B
Product Specifications
- Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor
- Replaces: YS4Z-17508-BB
- Base No.: 17508
- Item Weight: 2.60 Pounds
- Item Dimensions: 8.1 x 6.2 x 11.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-17508-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, SE, SES, Sony Limited Edition, SVT, ZTS, ZTW, ZX3, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS
View related parts
2007 Ford Focus Wiper Motor Part Number: 7S4Z-17508-A
Product Specifications
- Other Name: Motor Assembly - Wiper; Back Glass Wiper Motor; Rear Motor
- Replaces: YS4Z-17508-AB
- Base No.: 17508
- Item Weight: 2.90 Pounds
- Item Dimensions: 4.9 x 5.7 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7S4Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Focus Submodels:
- LX, S, SE, SES, Sony Limited Edition, ST, SVT, ZTS, ZTW, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2007 Ford Focus Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Focus Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Focus Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Focus Wiper Motor Parts Q&A

Q: How to service the rear window wiper motor on 2007 Ford Focus?
A: A proper servicing position for the rear window wiper motor requires the wiper motor to be placed in park. Start by lifting the cover while gradually loosening the front window wiper pivot arm nut two times before tightening it to 20 Nm (15 lb-ft) during reinstallation. After raising the rear window wiper pivot arm and freeing it from the taper using side movement you should remove the nut and pivot arm. Detach the liftgate trim panel screws before cutting off the wiper motor electrical connection. Take out the bolt and ground lead then displace the rear window wiper motor mounting plate by removing its three mounting bolts while tightening the bolts to 8 Nm (71 lb-in) during reinstallation. Verify that the wiper motor sits at park before unfastening the mounting plate's three bolts while extracting the rear window wiper motor from its location through reinstallation with 8 Nm (71 lb-in) torque. Execute the reverse version of your removal steps to accomplish the installation process.