How to service and repair the headlamp dimmer switch on 2007 Ford Freestar?

The first step to repair or service the headlamp dimmer switch is to take out the ignition lock cylinder. First remove the three screws that hold down the lower steering column shroud before proceeding to detach both the instrument cluster finish panel and the upper steering column shroud. Detach both electrical connectors from the multi-function switch before you remove the two mounting screws. The installation process finishes by executing the opposite actions used during decommission.

OEM 2007 Ford Freestar Dimmer Switch

Light Dimmer Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Dimmer Switch found

View related parts
2007 Ford Freestar Dimmer Switch
Part Number: 3F2Z-11691-AAA
Product Specifications
- Other Name: Resistor Assembly; Headlight Dimmer Switch; Instrument Light Rheostat
- Manufacturer Note: Switch - Dimmer
- Base No.: 11691
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.8 x 2.3 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-11691-AAA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2007 Ford Freestar Dimmer Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestar Dimmer Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestar Dimmer Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestar Dimmer Switch Parts Questions & Experts Answers

Q: How to service and repair the headlamp dimmer switch on 2007 Ford Freestar?
A: The first step to repair or service the headlamp dimmer switch is to take out the ignition lock cylinder. First remove the three screws that hold down the lower steering column shroud before proceeding to detach both the instrument cluster finish panel and the upper steering column shroud. Detach both electrical connectors from the multi-function switch before you remove the two mounting screws. The installation process finishes by executing the opposite actions used during decommission.