How to Service the Mass Air Flow Sensor on 2007 Ford Freestar?

Service of the mass air flow (MAF) sensor starts with disconnecting the battery ground cable followed by disconnecting the MAF sensor electrical connector. The two securing screws must be removed from the MAF sensor before extracting the sensor from its position. The correct installation of the new sensor requires screw tightening to 10 Nm (89 lb-in) following the inverse order of removal steps.

OEM 2007 Ford Freestar Mass Air Flow Sensor

MAF Sensor Meter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mass Air Flow Sensor found

View related parts
2007 Ford Freestar Mass Air Flow Sensor
Part Number: 3W4Z-12B579-AC
$157.79 MSRP: $259.64
You Save: $101.85 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly; MAF Sensor; Air Mass Sensor
- Replaces: 3W4Z-12B579-AB
- Base No.: 12B579
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W4Z-12B579-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Freestar Submodels:
- Base, Limited, S, SE, SEL, SES | 6 Cyl 3.9 L GAS, 6 Cyl 4.2 L GAS

2007 Ford Freestar Mass Air Flow Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestar Mass Air Flow Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestar Mass Air Flow Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestar Mass Air Flow Sensor Parts Questions & Experts Answers

Q: How to Service the Mass Air Flow Sensor on 2007 Ford Freestar?
A: Service of the mass air flow (MAF) sensor starts with disconnecting the battery ground cable followed by disconnecting the MAF sensor electrical connector. The two securing screws must be removed from the MAF sensor before extracting the sensor from its position. The correct installation of the new sensor requires screw tightening to 10 Nm (89 lb-in) following the inverse order of removal steps.