My Garage
Cart

OEM 2007 Ford Freestyle Oil Pan Baffle

Oil Drain Pan Baffle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Oil Pan Baffle found

  • 2007 Ford Freestyle Oil Pan Baffle Diagram - YL8Z-6687-AA
    View related parts

    2007 Ford Freestyle Baffle Plate, Upper Part Number: YL8Z-6687-AA

    $29.35 MSRP: $42.72
    You Save: $13.37 (32%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Baffle - Oil; Engine Oil Sump Windage Tray, Upper; Oil Pan Baffle; Upper Baffle; Baffle
    • Manufacturer Note: 24V
    • Position: Upper
    • Base No.: 6687
    • Item Weight: 3.10 Pounds
    • Item Dimensions: 9.1 x 3.0 x 16.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: YL8Z-6687-AA
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Ford Freestyle Submodels:
    • Limited, SE, SEL | 6 Cyl 3.0 L GAS

2007 Ford Freestyle Oil Pan Baffle

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Freestyle Oil Pan Baffle available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Freestyle Oil Pan Baffle as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Freestyle Oil Pan Baffle Parts Q&A

  • Q: How to service and repair the oil pan baffle while ensuring cleanliness during engine repair procedures on 2007 Ford Freestyle?
    A: Engine failure will occur if foreign matter contaminates oil or coolant passages while performing engine repair because of unclean work environments. The first step requires placing the vehicle onto a hoist with neutral transmission engagement. The service requires technicians to first remove the oil pump screen and pickup tube before proceeding to take out the eight baffle oil pan nuts. The baffle reinstallation requires sequential nut tightening at 5 Nm (44 lb-in) then an additional rotation by 45 degrees. The completion of installation requires following the reverse procedure steps.