How to Service and Repair the Drive Shaft for the 4.0L Engine on 2007 Ford Mustang?

The first step to service or repair the driveshaft of a 4.0L engine requires hoisting the vehicle with transmission set to neutral. Apply index marks to the driveshaft in order to achieve proper alignment when reinstalling it. The eight driveshaft flange bolts require replacement before installation where torque should be set to 103 Nm (76 ft. lbs). Exercise careful handling since the driveshaft flanges require tight contact with their flange pilots and should avoid striking either component with a hammer. A proper tool should be used only in the specified area to separate the driveshaft flanges from their pilots before removing the driveshaft. The installation requires driveshaft flanges to seat perfectly on pinion flange pilots followed by an equal distribution of torque across the bolts in a cross pattern. The threads of retained driveshaft flange bolts can be treated with threadlock and sealer when new flange bolts are not accessible. Use the installation opposite procedure while using new fasteners.

OEM 2007 Ford Mustang Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Drive Shafts found

View related parts
2007 Ford Mustang Drive Shaft Part Number: BR3Z-4R602-H
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: BR3Z-4R602-B, 7R3Z-4R602-C, 9R3Z-4R602-A
- Base No.: 4R602
- Item Weight: 46.00 Pounds
- Item Dimensions: 9.5 x 75.3 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BR3Z-4R602-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Shelby GT500, Shelby GT500KR | 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Drive Shaft Part Number: 8R3Z-4602-B
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 7R3Z-4602-A, 4R3Z-4602-BA, 6R3Z-4602-B
- Base No.: 4602
- Item Weight: 42.40 Pounds
- Item Dimensions: 57.6 x 11.7 x 7.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-4602-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Drive Shaft Part Number: 8R3Z-4602-A
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 4R3Z-4602-AA, 6R3Z-4602-A
- Base No.: 4602
- Item Weight: 34.00 Pounds
- Item Dimensions: 67.9 x 11.3 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8R3Z-4602-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Base, GT, Shelby GT500 | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS
View related parts
2007 Ford Mustang Drive Shaft Part Number: 9R3Z-4R602-AA
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 6R3Z-4R602-C, 8R3Z-4R602-A
- Base No.: 3B413
- Item Weight: 46.90 Pounds
- Item Dimensions: 67.9 x 11.5 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9R3Z-4R602-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Ford Mustang Submodels:
- Bullitt, GT, Shelby GT, Shelby GT500, Shelby GT500KR | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2007 Ford Mustang Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Ford Mustang Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Ford Mustang Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Ford Mustang Drive Shaft Parts Q&A

Q: How to Service and Repair the Drive Shaft for the 4.0L Engine on 2007 Ford Mustang?
A: The first step to service or repair the driveshaft of a 4.0L engine requires hoisting the vehicle with transmission set to neutral. Apply index marks to the driveshaft in order to achieve proper alignment when reinstalling it. The eight driveshaft flange bolts require replacement before installation where torque should be set to 103 Nm (76 ft. lbs). Exercise careful handling since the driveshaft flanges require tight contact with their flange pilots and should avoid striking either component with a hammer. A proper tool should be used only in the specified area to separate the driveshaft flanges from their pilots before removing the driveshaft. The installation requires driveshaft flanges to seat perfectly on pinion flange pilots followed by an equal distribution of torque across the bolts in a cross pattern. The threads of retained driveshaft flange bolts can be treated with threadlock and sealer when new flange bolts are not accessible. Use the installation opposite procedure while using new fasteners.