How to Service and Repair the Water Pump on 2007 Lincoln Navigator?

To maintain the coolant pump, drain the engine cooling system, take out the cooling fan and loosen the coolant pump pulley bolts. Unhook the drive belt to the accessory, dismount the pulley and bolts holding the coolant pump in place. The process of reinstallation requires the opposite of the previous steps and a fresh O-ring is placed that must be tightened.

OEM 2007 Lincoln Navigator Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Water Pump found

View related parts
2007 Lincoln Navigator Water Pump Part Number: 4C3Z-8501-B
$131.50 MSRP: $216.36
You Save: $84.86 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Pump Assembly - Water; Engine Water Pump; Water Pump Assembly
- Replaced by: 4C3Z-8501-D
- Replaces: PW-461, YC3Z-8501-AB, 7L3Z-8501-A, YC3Z-8501-AA
- Base No.: 8501
- Item Weight: 5.30 Pounds
- Item Dimensions: 6.8 x 5.7 x 5.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4C3Z-8501-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L GAS

2007 Lincoln Navigator Water Pump

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Navigator Water Pump available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Navigator Water Pump as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Navigator Water Pump Parts Q&A

Q: How to Service and Repair the Water Pump on 2007 Lincoln Navigator?
A: To maintain the coolant pump, drain the engine cooling system, take out the cooling fan and loosen the coolant pump pulley bolts. Unhook the drive belt to the accessory, dismount the pulley and bolts holding the coolant pump in place. The process of reinstallation requires the opposite of the previous steps and a fresh O-ring is placed that must be tightened.