My Garage
Cart

OEM 2007 Lincoln Town Car Hood Latch

Engine Hood Latch
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Hood Latch found

  • 2007 Lincoln Town Car Hood Latch - 5W1Z-16700-A
    2007 Lincoln Town Car Hood Latch Diagram - 5W1Z-16700-A
    View related parts

    2007 Lincoln Town Car Latch Assembly Part Number: 5W1Z-16700-A

    $47.60 MSRP: $71.28
    You Save: $23.68 (34%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Latch Assembly - Hood; Hood Latch; Lock
    • Base No.: 16700
    • Item Weight: 1.60 Pounds
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 5W1Z-16700-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2007 Lincoln Town Car Submodels:
    • Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Lincoln Town Car Hood Latch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Hood Latch available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Hood Latch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Town Car Hood Latch Parts Q&A

  • Q: How to service and repair the hood latch on 2007 Lincoln Town Car?
    A: The first step for servicing or repairing the hood latch requires removal of the radiator sight shield together with all 5 pin-type retainers. The service and repair of the hood ajar switch require disconnecting its electrical connector. Prior to dislodging the 2 bolts which fasten the hood latch you need to note down its current location. Follow the installation step by securing all bolts at 12 Nm (9 lb-ft) torque. Cut the connection of the hood latch release cable before pulling out the hood latch. The installation requires you to repeat the removal steps backward while testing if the hood striker interacts properly with the hood latch.