How to remove and replace the rear shock absorber on 2007 Lincoln Town Car?

Turning off the electrical power to the air suspension system is crucial before shock absorber replacement due to the risk of unwanted air spring performances that may shift the vehicle while servicing. The first step is to disable the air suspension service switch by turning it to OFF position. Position the vehicle in NEUTRAL while placing it on a hoist and support the rear axle with a suitable jack or jack stands. After removing the upper shock nut with its washer and insulator discard all components before putting in new pieces while tightening the upper nut to 40 Nm (30 ft. lbs). The shock absorber installation process requires removal of the lower shock nut and bolt and shock absorber where the discarded parts must be replaced by new components before securing the new shock absorber with a torque setting of 90 Nm (66 ft. lbs). Finish the installation by returning to the reverse order of procedures. Follow the procedure by replacing original fasteners with new parts which have the same number or approved replacement components. Implement the recommended torque settings for component retention.

OEM 2007 Lincoln Town Car Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Shock Absorbers found

View related parts
2007 Lincoln Town Car Shock Absorber
Part Number: BW7Z-18124-A
$102.65 MSRP: $168.91
You Save: $66.26 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Air Spring to Coil Spring Conversion; Complete Strut.; Strut; Shock
- Replaces: 7W7Z-18124-H, ASH-1035, 6W7Z-18124-B, 6W7Z-18124-D, ASH-24529, 7W7Z-18124-A, BW7Z-18124-B, 6W7Z-18124-A, 7W7Z-18124-C, 7W7Z-18124-D, ASH-1037, ASH-1036, ASH-12274
- Base No.: 18124
- Item Weight: 7.00 Pounds
- Item Dimensions: 4.9 x 5.0 x 22.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: BW7Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Lincoln Town Car Shock Absorber, Gray/Red, Rear
Part Number: 8W7Z-18125-D
$77.11 MSRP: $129.45
You Save: $52.34 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Shock Absorber, Rear; Shock
- Position: Rear
- Replaces: 4W3Z-18125-AA, 6W7Z-18125-D, 6W1Z-18125-A, 7W7Z-18125-D, 8W3Z-18125-A, 8W7Z-18125-B, ASH-1152, ASH-24537, ASH-711, 7W1Z-18125-A, ASH-12275, 3W7Z-18125-GA, 4W7Z-18125-DA, 3U2Z-18125-AC, 7W3Z-18125-H, 8W7Z-18125-C, ASH-24538, ASH-1038, ASH-24536, ASH-267, ASH-1041
- Base No.: 18125
- Item Weight: 5.10 Pounds
- Item Dimensions: 27.0 x 3.0 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W7Z-18125-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2007 Lincoln Town Car Shock Absorber
Part Number: 9W1Z-18124-A
Product Specifications
- Other Name: Shock Absorber Assembly; Suspension Strut and Shock Absorber Kit; Air Spring to Coil Spring Conversion; Complete Strut.; Strut; Shock
- Replaces: 6W1Z-18124-A, ASH-1034, 7W1Z-18124-A
- Base No.: 18124
- Item Weight: 6.50 Pounds
- Item Dimensions: 22.3 x 5.0 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 9W1Z-18124-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Lincoln Town Car Submodels:
- Designer Series, Executive, Executive L, Protection Series, Signature, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2007 Lincoln Town Car Shock Absorber

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Lincoln Town Car Shock Absorber available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Lincoln Town Car Shock Absorber as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Lincoln Town Car Shock Absorber Parts Questions & Experts Answers

Q: How to remove and replace the rear shock absorber on 2007 Lincoln Town Car?
A: Turning off the electrical power to the air suspension system is crucial before shock absorber replacement due to the risk of unwanted air spring performances that may shift the vehicle while servicing. The first step is to disable the air suspension service switch by turning it to OFF position. Position the vehicle in NEUTRAL while placing it on a hoist and support the rear axle with a suitable jack or jack stands. After removing the upper shock nut with its washer and insulator discard all components before putting in new pieces while tightening the upper nut to 40 Nm (30 ft. lbs). The shock absorber installation process requires removal of the lower shock nut and bolt and shock absorber where the discarded parts must be replaced by new components before securing the new shock absorber with a torque setting of 90 Nm (66 ft. lbs). Finish the installation by returning to the reverse order of procedures. Follow the procedure by replacing original fasteners with new parts which have the same number or approved replacement components. Implement the recommended torque settings for component retention.