How to remove and replace the clutch slave cylinder on 2007 Mercury Milan?

Replacement of the clutch slave cylinder, check the label of the products on the label and consult the medical help when required. Only DOT 3 brake fluid should be used because any other brake fluid may hurt brakes. Always have master cylinder full on bleeding and remove fluid before disconnection of the cylinder. Installation Reverse procedure and bleed the system.

OEM 2007 Mercury Milan Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Slave Cylinder found

View related parts
2007 Mercury Milan Slave Cylinder Part Number: 6M8Z-7A512-A
Product Specifications
- Other Name: Cylinder Assembly - Clutch Slave; Clutch Slave Cylinder
- Replaces: 1S4Z-7A512-AA
- Base No.: 7A508
- Item Weight: 1.00 Pounds
- Item Dimensions: 3.6 x 2.6 x 5.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6M8Z-7A512-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2007 Mercury Milan Submodels:
- Base, Premier | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2007 Mercury Milan Clutch Slave Cylinder

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Milan Clutch Slave Cylinder available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Milan Clutch Slave Cylinder as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2007 Mercury Milan Clutch Slave Cylinder Parts Q&A

Q: How to remove and replace the clutch slave cylinder on 2007 Mercury Milan?
A: Replacement of the clutch slave cylinder, check the label of the products on the label and consult the medical help when required. Only DOT 3 brake fluid should be used because any other brake fluid may hurt brakes. Always have master cylinder full on bleeding and remove fluid before disconnection of the cylinder. Installation Reverse procedure and bleed the system.