FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Montego Air Bag Sensor
Air Bag Impact Sensor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Air Bag Sensor found
2007 Mercury Montego Impact Sensor, Front Part Number: 5F9Z-14B345-AA
$112.20 MSRP: $155.21You Save: $43.01 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Sensor - Side Air Bag; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Sensor; Side Sensor
- Manufacturer Note: Crash Sensor - Front Or Side - LH/RH
- Position: Front
- Base No.: 14B004
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 6
- SKU: 5F9Z-14B345-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Montego Air Bag Sensor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Montego Air Bag Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Montego Air Bag Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Montego Air Bag Sensor Parts Q&A
- Q: How to Safely Service the Air Bag Sensor in the Second Row, C-Pillar, for Optimal System Operation on 2007 Mercury Montego?A: Safety glasses should be worn to reduce the risk of injury during air bag supplemental restraint system (SRS) repairs of the side impact sensor placed in the second row C-pillar section. Correct sensor orientation must be verified before system activation while any damaged SRS components must be replaced if detected regardless of air bag deployment occurrence. Visual checks of sensor mounting bracket and wiring pigtail need to be done to position the parts correctly after collision. Installation of memory saver devices poses risks to personal safety therefore these should never be used. The RCM fuse removal with the ignition ON will cause the air bag warning lamp to activate although no SRS faults exist. A vehicle will not be returned to customers unless the SRS system operates without failures. To fix a problem the original part needs replacement; if the issue remains follow the diagnostic process again while reinstalling the original component. The procedure starts by deactivating power then taking out both the rear seat cushion along with the rear corner backrest. Detach the side impact sensor electrical connector before removing its bolt and lock the bolt into position at 12 Nm (9 lb-ft) tension during assembly. Note the sensor position along with its locating tab while inspecting that the C-pillar mating surface matches the side impact severity sensor mating surface which must be clear of debris. The end of the installation process requires you to reinstall the new sensor while following the removal steps in reverse order and to repower the system.