FordParts
My Garage
My Account
Cart
OEM 2007 Mercury Mountaineer Canister Purge Valve
Vapor Canister Purge Valve EVAP- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Canister Purge Valves found
2007 Mercury Mountaineer Purge Solenoid Part Number: 6L2Z-9F945-AA
$84.79 MSRP: $123.42You Save: $38.63 (32%)Ships in 1 Business DayProduct Specifications- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Vapor Canister; Vent Control Solenoid; Solenoid
- Manufacturer Note: All 3.0L
- Replaces: 5U5Z-9F945-GA
- Base No.: 9F945
- Item Weight: 1.00 Pounds
- Item Dimensions: 5.7 x 3.8 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mountaineer Solenoid Valve Part Number: 4U5Z-9J451-BA
$49.08 MSRP: $76.60You Save: $27.52 (36%)Product Specifications- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Valve; Purge Solenoid
- Base No.: 9C915
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U5Z-9J451-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2007 Mercury Mountaineer Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2007 Mercury Mountaineer Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2007 Mercury Mountaineer Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2007 Mercury Mountaineer Canister Purge Valve Parts Q&A
- Q: How to service and repair the evaporative emission canister purge valve on 2007 Mercury Mountaineer?A: A correct procedure to service and repair the evaporative emission canister purge valve begins with placing the vehicle in neutral position on a hoist. The process starts with removing the battery ground cable to prevent electrical sparks that might cause explosive fuel vapors. The first step involves separating the electrical connector from the EVAP canister purge valve and then unattaching the two vapor tube fast connect couplings. Detach the valve from its bracket then pull it out from the vehicle. The reverse procedure should be followed to install the new valve. You should test the evaporative emission system for leaks before executing the evaporative emission repair verification drive cycle to verify system functionality.