How to service the power window switch on 2008 Ford E-150?

The service of the power window switch requires beginning with the removal of the window control switch bezel. The two screws holding the window control switch in place should be removed. After extracting the window control switch screws it becomes possible to disconnect the control switch. The service process ends by performing the opposite procedures used for removal.

OEM 2008 Ford E-150 Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Window Switch found

View related parts
2008 Ford E-150 Window Switch, Passenger Side
Part Number: E6DZ-14529-C
$18.21 MSRP: $28.91
You Save: $10.70 (38%)
ADD TO CART
Product Specifications
- Other Name: Switch - Window Control - Single; Door Window Switch, Left, Right; Door Window Switch
- Position: Passenger Side
- Base No.: 14529
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.1 x 1.7 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: E6DZ-14529-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-150 Submodels:
- Base, Chateau, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L GAS

2008 Ford E-150 Window Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-150 Window Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-150 Window Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-150 Window Switch Parts Questions & Experts Answers

Q: How to service the power window switch on 2008 Ford E-150?
A: The service of the power window switch requires beginning with the removal of the window control switch bezel. The two screws holding the window control switch in place should be removed. After extracting the window control switch screws it becomes possible to disconnect the control switch. The service process ends by performing the opposite procedures used for removal.