How to service the ignition coil-on-plug on 2008 Ford E-250?

In order to work on the ignition coil-on-plug, take out the engine cover and air cleaner assembly. Unplug the ignition coil connector and loosen its securing bolt. Install the new coil, screwing the bolt into 6 Nm (53 lb-in), and rub dielectric compound onto the coil boots and close the installation.

OEM 2008 Ford E-250 Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Coil found

View related parts
2008 Ford E-250 Ignition Coil Part Number: 3W7Z-12029-AA
$48.95 MSRP: $80.55
You Save: $31.60 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly - Ignition; Direct Ignition Coil; Direct Ignition Coil Oe Quality; Coil On Plug Coil; Ignition Coil Set; Coil
- Replaces: 1L2Z-12029-AA, 8W7Z-12029-A, DG-540
- Base No.: 12029
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.7 x 8.0 x 7.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3W7Z-12029-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford E-250 Submodels:
- Base | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L CNG, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS, 8 Cyl 5.4 L LPG

2008 Ford E-250 Ignition Coil

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford E-250 Ignition Coil available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford E-250 Ignition Coil as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford E-250 Ignition Coil Parts Q&A

Q: How to service the ignition coil-on-plug on 2008 Ford E-250?
A: In order to work on the ignition coil-on-plug, take out the engine cover and air cleaner assembly. Unplug the ignition coil connector and loosen its securing bolt. Install the new coil, screwing the bolt into 6 Nm (53 lb-in), and rub dielectric compound onto the coil boots and close the installation.