My Garage
Cart

OEM 2008 Ford Edge Air Duct

Air Hose
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Air Duct found

  • 2008 Ford Edge Air Duct - 7T4Z-9B659-A
    2008 Ford Edge Air Duct Diagram - 7T4Z-9B659-A
    View related parts

    2008 Ford Edge Air Inlet Assembly Part Number: 7T4Z-9B659-A

    $90.78 MSRP: $139.70
    You Save: $48.92 (36%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Hose - Air; Engine Air Intake Hose; Air Filter Housing; Air Intake Hose
    • Base No.: 9B659
    • Item Weight: 6.40 Pounds
    • Item Dimensions: 16.3 x 16.8 x 12.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 7T4Z-9B659-A
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Ford Edge Submodels:
    • Limited, SE, SEL, SEL Plus, Sport | 6 Cyl 3.5 L GAS

2008 Ford Edge Air Duct

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Edge Air Duct available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Edge Air Duct as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Edge Air Duct Parts Q&A

  • Q: How to Service and Repair an Air Duct in the Air Cleaner Outlet Pipe on 2008 Ford Edge?
    A: Start the intake air duct service by disconnecting both the crankcase vent tube and vacuum tube that are attached to the air cleaner outlet pipe. After releasing the clamp holding the air cleaner outlet pipe to the cover begin by torquing it to 5 Nm (44 lb-in) during reinstallation. Before removing the outlet pipe from the throttle body you must loosen the clamp which connects the air cleaner outlet pipe to this assembly. After reinstalling the clamp you must apply torque to 5 Nm (44 lb-in). The installation must end with a reverse order of steps after making certain the air cleaner outlet pipe forms a proper seal to avoid unmetered air entering the engine.