How to service the oil pan on 2008 Ford Explorer?

Starting the servicing process requires a hoist setup with neutral transmission to position the vehicle. You must drain the engine oil by extracting the drain plug before completely tightening it to 26 Nm (19 lb-ft). Detach the bolts which hold the oil pan in position and also the gasket while discarding the existing gasket. Cleaning the sealing surfaces requires avoidance of metal scrapers, wire brushes and abrasive tools that may produce scratches and gouges through contact and users should utilize plastic scraping tools to eliminate old gasket remains while cleaning and inspecting surfaces thoroughly. The process of reinstallation requires you to tighten the oil pan bolts at 11 Nm (8 lb-ft) in the same order as removal. Apply clean engine oil as the last step in the procedure.

OEM 2008 Ford Explorer Oil Pan

Oil Drain Pan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Oil Pans found

View related parts
2008 Ford Explorer Oil Pan, Upper Part Number: 1L5Z-6675-AA
$146.10 MSRP: $212.67
You Save: $66.57 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bulkhead Assembly - Front; Engine Oil Pan, Upper; Upper Oil Pan; Frame Assembly
- Position: Upper
- Replaces: F77Z-6675-BD
- Base No.: 6675
- Item Weight: 14.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1L5Z-6675-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Explorer Oil Pan, Lower Part Number: 5R3Z-6675-AA
$45.87 MSRP: $65.62
You Save: $19.75 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan, Lower; Lower Oil Pan; Engine Oil Pan
- Position: Lower
- Replaces: 1L2Z-6675-FA
- Base No.: 6675
- Item Weight: 2.90 Pounds
- Item Dimensions: 3.4 x 15.8 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5R3Z-6675-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, NBX, Postal, Sport, XL, XL Fleet, XLS, XLS Sport, XLT, XLT Sport | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS
View related parts
2008 Ford Explorer Oil Pan Part Number: 6L2Z-6675-AA
Product Specifications
- Other Name: Pan Assembly - Engine Oil; Engine Oil Pan
- Base No.: 6675
- Item Weight: 10.90 Pounds
- Item Dimensions: 13.1 x 5.9 x 13.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-6675-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 8 Cyl 4.6 L GAS

2008 Ford Explorer Oil Pan

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Oil Pan available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Oil Pan as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Explorer Oil Pan Parts Q&A

Q: How to service the oil pan on 2008 Ford Explorer?
A: Starting the servicing process requires a hoist setup with neutral transmission to position the vehicle. You must drain the engine oil by extracting the drain plug before completely tightening it to 26 Nm (19 lb-ft). Detach the bolts which hold the oil pan in position and also the gasket while discarding the existing gasket. Cleaning the sealing surfaces requires avoidance of metal scrapers, wire brushes and abrasive tools that may produce scratches and gouges through contact and users should utilize plastic scraping tools to eliminate old gasket remains while cleaning and inspecting surfaces thoroughly. The process of reinstallation requires you to tighten the oil pan bolts at 11 Nm (8 lb-ft) in the same order as removal. Apply clean engine oil as the last step in the procedure.