FordParts
My Garage
My Account
Cart
OEM 2008 Ford Explorer Sway Bar Link
Stabilizer Sway Bar Link- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Sway Bar Links found
2008 Ford Explorer Stabilizer Link, Front Part Number: 6L2Z-5K483-AA
$26.79 MSRP: $42.55You Save: $15.76 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Link; Front Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 2.00 Pounds
- Item Dimensions: 19.6 x 6.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6L2Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Explorer Stabilizer Link, Rear Part Number: 6L2Z-5K484-BA
$20.04 MSRP: $31.82You Save: $11.78 (38%)Ships in 1 Business DayProduct Specifications- Other Name: Link; Rear Suspension Stabilizer Bar Link Kit; Sway Bar Link
- Position: Rear
- Base No.: 5K484
- Item Weight: 0.70 Pounds
- Item Dimensions: 8.3 x 7.7 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6L2Z-5K484-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Ford Explorer Sway Bar Link
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Explorer Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Explorer Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Ford Explorer Sway Bar Link Parts Q&A
- Q: How to service the front sway bar link on 2008 Ford Explorer?A: Start sway bar front link maintenance by taking off the wheel with the attached tire. After retrieving the two sway bar nuts and grommets, you must tighten installation bolts at curb height to 35 Nm (26 lb-ft). Start the service by removing both sway bar studs and after that separate the two sway bar links. The technician needs to examine mating surfaces together with internal threads under clean conditions to check for foreign matter and thread locking compound removal. You can remove the sway bar after rotating it outward together with the discarded sway bar bracket bolts. Reinstallation of the new bolts should be done by tightening them to 55 Nm (41 lb-ft) at curb height. To install the sway bar bushings, place the groove of the bushing against the sway bar upset and check for wear or damage before making replacements as needed. The installation of sway bar bushings begins with a left-hand side tightening sequence followed by the mirror process of removal.