How to service and repair the brake light switch on 2008 Ford F-150?

Before servicing or repairing the brake light switch the first step should be to disconnect the battery. Disconnect the electrical connector from the stoplamp switch. Use first the retainer then the pin to extract the stoplamp switch. The restored switch needs a reverse process of original installation steps.

OEM 2008 Ford F-150 Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Ford F-150 Stoplamp Switch Part Number: 4L3Z-13480-AA
$59.67 MSRP: $98.18
You Save: $38.51 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Back Up Light Switch; Brake Light Switch; Back-Up Switch
- Replaces: 2L1Z-13480-AA
- Base No.: 13480
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.2 x 4.1 x 4.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L3Z-13480-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Ford F-150 Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-150 Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-150 Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-150 Brake Light Switch Parts Q&A

Q: How to service and repair the brake light switch on 2008 Ford F-150?
A: Before servicing or repairing the brake light switch the first step should be to disconnect the battery. Disconnect the electrical connector from the stoplamp switch. Use first the retainer then the pin to extract the stoplamp switch. The restored switch needs a reverse process of original installation steps.