How to service and repair the windshield washer reservoir on 2008 Ford F-150?

In order to service the windshield washer reservoir, unplug the electrical connector of the pump and look at the warning. Please drain the fluid and remove the reservoir hose. Take out the bolts and make sure they are installed. The pump should never be turned on prior to filling the reservoir as this may result in an early failure. Installation Revert the procedure to remove.

OEM 2008 Ford F-150 Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
2008 Ford F-150 Washer Reservoir Part Number: 7L3Z-17618-AA
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir
- Manufacturer Note: Includes Reservoir And Cap
- Replaces: 4L3Z-17618-AA
- Base No.: 17618
- Item Weight: 2.20 Pounds
- Item Dimensions: 9.3 x 9.0 x 10.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-17618-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-150 Submodels:
- FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, STX, THE 60TH ANNIVERSARY EDITION, XL, XLT | 6 Cyl 4.2 L GAS, 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2008 Ford F-150 Washer Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-150 Washer Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-150 Washer Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-150 Washer Reservoir Parts Q&A

Q: How to service and repair the windshield washer reservoir on 2008 Ford F-150?
A: In order to service the windshield washer reservoir, unplug the electrical connector of the pump and look at the warning. Please drain the fluid and remove the reservoir hose. Take out the bolts and make sure they are installed. The pump should never be turned on prior to filling the reservoir as this may result in an early failure. Installation Revert the procedure to remove.