How to Service and Repair the Fuel Pressure Sensor on Midship and Aft-of-Axle Fuel Tank Equipped on 2008 Ford F-250 Super Duty?

The first safety step for servicing the fuel tank pressure sensor on midship tank vehicles and aft-of-axle tanks or auxiliary tanks requires disconnecting the battery ground cable to protect against EVAP system fire or explosion hazards. The technician must stay away from using open flames and from smoking in areas that contain fuel components. The first step requires hoisting the vehicle into NEUTRAL mode followed by removing the fuel tank from its position. Any midship fuel tank equipped vehicles need their fuel tank pressure sensor electrical connector and fuel vapor tubes disconnected before the sensor can be taken off. The fuel tank pressure sensor needs to be turned counterclockwise while pressing down if you need to remove it from aft-of-axle and auxiliary fuel tank vehicles. The installation process for the new sensor requires performing the steps in reverse order of removal. The Evaporative Emission System Leak Test needs to be performed after sensor installation to verify system functionality.

OEM 2008 Ford F-250 Super Duty Fuel Pressure Sensor

Fuel Tank Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Fuel Pressure Sensors found

View related parts
2008 Ford F-250 Super Duty Pressure Sensor
Part Number: 8C3Z-9G756-B
$80.89 MSRP: $133.09
You Save: $52.20 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Injection Pressure Sensor; Fuel Pressure Sensor
- Replaces: CM-5304, 8C3Z-9G756-A
- Item Weight: 0.30 Pounds
- Item Dimensions: 7.3 x 4.0 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8C3Z-9G756-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Pressure Sensor
Part Number: 3F2Z-9G756-AC
$84.64 MSRP: $139.27
You Save: $54.63 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
- Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
- Base No.: 9F972
- Item Weight: 0.30 Pounds
- Item Dimensions: 6.3 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 3F2Z-9G756-AC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS
View related parts
2008 Ford F-250 Super Duty Pressure Sensor
Part Number: 5C3Z-9G756-AE
$84.73 MSRP: $134.55
You Save: $49.82 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Fuel Injector Pressure; Fuel Injection Pressure Sensor; Fuel Tank Pressure Sensor; Fuel Pressure Sensor
- Replaces: 5C3Z-9G756-AA, 5C3Z-9G756-AD, CM-5230, CM-5259
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5C3Z-9G756-AE
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS

2008 Ford F-250 Super Duty Fuel Pressure Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Fuel Pressure Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Fuel Pressure Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-250 Super Duty Fuel Pressure Sensor Parts Questions & Experts Answers

Q: How to Service and Repair the Fuel Pressure Sensor on Midship and Aft-of-Axle Fuel Tank Equipped on 2008 Ford F-250 Super Duty?
A: The first safety step for servicing the fuel tank pressure sensor on midship tank vehicles and aft-of-axle tanks or auxiliary tanks requires disconnecting the battery ground cable to protect against EVAP system fire or explosion hazards. The technician must stay away from using open flames and from smoking in areas that contain fuel components. The first step requires hoisting the vehicle into NEUTRAL mode followed by removing the fuel tank from its position. Any midship fuel tank equipped vehicles need their fuel tank pressure sensor electrical connector and fuel vapor tubes disconnected before the sensor can be taken off. The fuel tank pressure sensor needs to be turned counterclockwise while pressing down if you need to remove it from aft-of-axle and auxiliary fuel tank vehicles. The installation process for the new sensor requires performing the steps in reverse order of removal. The Evaporative Emission System Leak Test needs to be performed after sensor installation to verify system functionality.