How to Service and Repair the Front Sway Bar Link on F-250 and F-350 on 2008 Ford F-250 Super Duty?

F-250 and F-350 models must be placed in NEUTRAL gear on a hoist before starting any maintenance on the front sway bar and link. Install new components to the sway bar link while using torque to 133 Nm (98 ft. lbs.) on each upper replacement part. You must next remove the lower nuts, washers, bolts, and sway bar links, discard all parts but replace them with new components and apply tightness value at 133 Nm (98 ft. lbs.). Disassemble the sway bar brackets and nuts which also include the sway bar before discarding them and reinstall the components using a torque of 48 Nm (33 ft. lbs.). Proceed with the reverse order of steps to finish reinstalling the component. When replacing suspension fasteners it is necessary to use either equivalent parts with matching part numbers or follow the manufacturer guidelines for safety purposes. The installation torque values must be followed strictly to secure critical components properly.

OEM 2008 Ford F-250 Super Duty Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Sway Bar Links found

View related parts
2008 Ford F-250 Super Duty Stabilizer Link, Rear
Part Number: DC3Z-5K484-A
$42.82 MSRP: $68.00
You Save: $25.18 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Rear
- Replaces: F81Z-5K484-DA, MEF-53
- Base No.: 5K484
- Item Weight: 2.00 Pounds
- Item Dimensions: 19.4 x 6.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: DC3Z-5K484-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL
View related parts
2008 Ford F-250 Super Duty Stabilizer Link, Front
Part Number: YC3Z-5K483-AA
$47.30 MSRP: $77.27
You Save: $29.97 (39%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 2WD
- Position: Front
- Replaces: F81Z-5K483-AA
- Base No.: 5K483
- Item Weight: 1.40 Pounds
- Item Dimensions: 19.1 x 6.2 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: YC3Z-5K483-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, Limited, Platinum, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 6.8 L FLEX, 8 Cyl 6.8 L GAS, 8 Cyl 7.3 L DIESEL, 8 Cyl 7.3 L GAS
View related parts
2008 Ford F-250 Super Duty Stabilizer Link, Front
Part Number: 7C3Z-5K483-A
$64.97 MSRP: $106.91
You Save: $41.94 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Front; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Position: Front
- Base No.: 5K483
- Item Weight: 1.90 Pounds
- Item Dimensions: 7.6 x 2.7 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 7C3Z-5K483-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.4 L DIESEL
View related parts
2008 Ford F-250 Super Duty Stabilizer Link, Rear
Part Number: F81Z-5K484-CA
$21.60 MSRP: $29.39
You Save: $7.79 (27%)
ADD TO CART
Product Specifications
- Other Name: Link; Suspension Stabilizer Bar Link, Rear; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link; Link Kit; Suspension Stabilizer Bar Link; Stabilizer Bar Link
- Manufacturer Note: 4x2
- Position: Rear
- Base No.: 5K484
- Item Weight: 1.80 Pounds
- Item Dimensions: 1.6 x 1.5 x 14.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: F81Z-5K484-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-250 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.2 L FLEX, 8 Cyl 6.4 L DIESEL, 8 Cyl 6.7 L DIESEL, 8 Cyl 7.3 L DIESEL

2008 Ford F-250 Super Duty Sway Bar Link

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-250 Super Duty Sway Bar Link available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-250 Super Duty Sway Bar Link as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-250 Super Duty Sway Bar Link Parts Questions & Experts Answers

Q: How to Service and Repair the Front Sway Bar Link on F-250 and F-350 on 2008 Ford F-250 Super Duty?
A: F-250 and F-350 models must be placed in NEUTRAL gear on a hoist before starting any maintenance on the front sway bar and link. Install new components to the sway bar link while using torque to 133 Nm (98 ft. lbs.) on each upper replacement part. You must next remove the lower nuts, washers, bolts, and sway bar links, discard all parts but replace them with new components and apply tightness value at 133 Nm (98 ft. lbs.). Disassemble the sway bar brackets and nuts which also include the sway bar before discarding them and reinstall the components using a torque of 48 Nm (33 ft. lbs.). Proceed with the reverse order of steps to finish reinstalling the component. When replacing suspension fasteners it is necessary to use either equivalent parts with matching part numbers or follow the manufacturer guidelines for safety purposes. The installation torque values must be followed strictly to secure critical components properly.