How to service the brake light switch on 2008 Ford F-350 Super Duty?

In order to service brake light switch, firstly, disconnect the electrical connector of the stoplamp switch and remove the retaining pin cover. Next, lift out the retaining pin and roll the stoplamp switch off the brake pedal and the brake booster push rod. All that is required to complete the installation is to revert the steps that were performed to remove.

OEM 2008 Ford F-350 Super Duty Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Light Switch found

View related parts
2008 Ford F-350 Super Duty Stoplamp Switch Part Number: F87Z-13480-AA
$28.85 MSRP: $46.55
You Save: $17.70 (39%)
ADD TO CART
Product Specifications
- Other Name: Switch Assembly - Stop Light; Brake Light Switch; Stop Light Switch
- Base No.: 13480
- Item Weight: 1.20 Pounds
- Item Dimensions: 3.2 x 1.3 x 3.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: F87Z-13480-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford F-350 Super Duty Submodels:
- Cabela's, FX4, Harley-Davidson Edition, King Ranch, Lariat, XL, XLT | 10 Cyl 6.8 L GAS, 8 Cyl 5.4 L GAS, 8 Cyl 6.0 L DIESEL, 8 Cyl 6.4 L DIESEL, 8 Cyl 7.3 L DIESEL

2008 Ford F-350 Super Duty Brake Light Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford F-350 Super Duty Brake Light Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford F-350 Super Duty Brake Light Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford F-350 Super Duty Brake Light Switch Parts Q&A

Q: How to service the brake light switch on 2008 Ford F-350 Super Duty?
A: In order to service brake light switch, firstly, disconnect the electrical connector of the stoplamp switch and remove the retaining pin cover. Next, lift out the retaining pin and roll the stoplamp switch off the brake pedal and the brake booster push rod. All that is required to complete the installation is to revert the steps that were performed to remove.