How to Service and Repair the Exhaust Valve and Intake Valve, Including Steps for Measuring Valve Clearance and Selecting Tappets on 2008 Ford Focus?

To maintain the valve, take off the valve cover and valve bolts and tighten them to 9 Nm, when reconnecting. Clearance between measure valves with a feeler gauge when camshafts are removed. Intake and exhaust valves should be desired to have a clearance of 0.25 and 0.30 mm respectively. Bring in new tappets which are not of specifications.

OEM 2008 Ford Focus Exhaust Valve

Exhaust Muffler Valve

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Exhaust Valve found

View related parts
2008 Ford Focus Exhaust Valve Part Number: 9S4Z-6505-A
$15.87 MSRP: $23.10
You Save: $7.23 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Valve - Exhaust
- Manufacturer Note: Ø 30MM
- Replaces: 1S7Z-6505-AA, 1S7Z-6505-A, 3S4Z-6505-AA, 9E5Z-6505-A, 8E5Z-6505-A
- Base No.: 6505
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 8
- SKU: 9S4Z-6505-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Ford Focus Submodels:
- S, SE, SEL, SES, ST, ZX3, ZX4, ZX4 ST, ZX5, ZXW | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS

2008 Ford Focus Exhaust Valve

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Ford Focus Exhaust Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Ford Focus Exhaust Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Ford Focus Exhaust Valve Parts Q&A

Q: How to Service and Repair the Exhaust Valve and Intake Valve, Including Steps for Measuring Valve Clearance and Selecting Tappets on 2008 Ford Focus?
A: To maintain the valve, take off the valve cover and valve bolts and tighten them to 9 Nm, when reconnecting. Clearance between measure valves with a feeler gauge when camshafts are removed. Intake and exhaust valves should be desired to have a clearance of 0.25 and 0.30 mm respectively. Bring in new tappets which are not of specifications.