OEM 2008 Ford Mustang Differential Cover

2008 Ford Mustang Differential Cover Parts Q&A

• Q: How to service and repair the differential cover on a 7.5-inch ring gear rear drive axle on 2008 Ford Mustang?

  A: You need to start service and repairs on the differential cover of Ford 7.5-inch ring gear rear drive axle by placing the vehicle into neutral gear at a hoist. Start with bolt removal of the 10 differential housing cover components before draining lubricant from the axle housing. Both the differential housing and the differential housing cover need cleaning of their machined areas to eliminate oil residue and these surfaces should receive protection from contaminants during the cleaning phase by using a cover. A constant bead of specified thickness silicone sealant must be applied to the differential housing cover immediately before its installation within a 15-minute time frame to prevent the need for additional sealant application. When you install the differential housing cover you should tighten its bolts to 46 Nm (33 lb-ft). To properly fill the axle keep the vehicle at ride height on a level surface while adding the recommended 1.42L (3.0 pt) specified lubricant which should be below the fill hole by 11.1-12.7 mm (7/16-1/2 inch). The last step requires you to put the filler plug into place while tightening it to reach a torque of 30 Nm (22 lb-ft).