How to repair a rear bumper cover on 2008 Lincoln Mark LT?

First inspect the rear bumper cover to decide if repair will restore it to quality specifications while maintaining correct fit and durability despite the possibility of new component costs being lower. Clean the broken tab(s) on the affected bumper with a plastics wax and grease remover before removing it. A hand-sanding operation with 80-grit sandpaper precedes compressed air cleaning of the repair site. Use plastics adhesion promoter following the guidance on product labels for application. Cut a piece of fiberglass cloth or equivalent which should cover the front part of the tab and create a wedge-shaped slope of 51 mm (2 in) behind the original tab. Apply the prepared repair adhesive material to the affected area while positioning the plastic material to form the tab shape at once. Shape the repair tab according to specifications through the use of a small angle sander after allowing a sufficient cure time yet avoid sanding into the exterior area. Differentiate the repair area with Ford-endorsed paint systems and then return the bumper cover to its proper position.

OEM 2008 Lincoln Mark LT Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Bumpers found

View related parts
2008 Lincoln Mark LT Bumper Cover, Front Part Number: 6L3Z-17D957-BAPTM
$321.57 MSRP: $504.18
You Save: $182.61 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover; Bumper Cover, Front
- Position: Front
- Base No.: 17D957
- Item Weight: 154.00 Pounds
- Item Dimensions: 81.6 x 42.8 x 43.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-17D957-BAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Bumper, Front Part Number: 6L3Z-17757-BA
$467.92 MSRP: $733.65
You Save: $265.73 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Manufacturer Note: (CP) Designates Crash Part - When Ordering Please Refer To Crash Part Truckload Program Guidelines
- Position: Front
- Base No.: 17757
- Item Weight: 39.20 Pounds
- Item Dimensions: 76.8 x 21.4 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-17757-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Bumper, Front Part Number: 6L3Z-17757-DAPTM
$345.49 MSRP: $507.33
You Save: $161.84 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Front; Bumper Face Bar, Front
- Position: Front
- Base No.: 17757
- Item Weight: 28.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L3Z-17757-DAPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Bumper, Rear Part Number: 8L3Z-17906-B
$650.72 MSRP: $964.03
You Save: $313.31 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 5L3Z-17906-BA
- Base No.: 17906
- Item Weight: 24.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-17906-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Bumper, Rear Part Number: 8L3Z-17906-DPTM
$534.94 MSRP: $785.52
You Save: $250.58 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 5L3Z-17906-DAA
- Base No.: 17906
- Item Weight: 23.90 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-17906-DPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Bumper, Rear Part Number: 8L3Z-17906-C
$561.69 MSRP: $832.13
You Save: $270.44 (33%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 5L3Z-17906-CA
- Base No.: 17906
- Item Weight: 24.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-17906-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS
View related parts
2008 Lincoln Mark LT Bumper, Rear Part Number: 8L3Z-17906-EPTM
$384.89 MSRP: $565.18
You Save: $180.29 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bumper Assembly - Rear; Bumper Face Bar, Rear
- Position: Rear
- Replaces: 5L3Z-17906-EAA
- Base No.: 17906
- Item Weight: 25.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L3Z-17906-EPTM
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln Mark LT Submodels:
- Base | 8 Cyl 5.4 L GAS

2008 Lincoln Mark LT Bumper

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln Mark LT Bumper available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln Mark LT Bumper as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln Mark LT Bumper Parts Q&A

Q: How to repair a rear bumper cover on 2008 Lincoln Mark LT?
A: First inspect the rear bumper cover to decide if repair will restore it to quality specifications while maintaining correct fit and durability despite the possibility of new component costs being lower. Clean the broken tab(s) on the affected bumper with a plastics wax and grease remover before removing it. A hand-sanding operation with 80-grit sandpaper precedes compressed air cleaning of the repair site. Use plastics adhesion promoter following the guidance on product labels for application. Cut a piece of fiberglass cloth or equivalent which should cover the front part of the tab and create a wedge-shaped slope of 51 mm (2 in) behind the original tab. Apply the prepared repair adhesive material to the affected area while positioning the plastic material to form the tab shape at once. Shape the repair tab according to specifications through the use of a small angle sander after allowing a sufficient cure time yet avoid sanding into the exterior area. Differentiate the repair area with Ford-endorsed paint systems and then return the bumper cover to its proper position.