How to Service and Repair the Differential Cover on 2008 Lincoln MKZ?

In order to fix the differential housing cover, ensure that you hoist the vehicle in neutral. Take off 10 bolts, de-fluidize, and clean. Use silicone sealant and place the cover in 15 minutes. Tighten the bolts with 23 Nm and fill the lubricant with 1.15L and level it 3-5 mm below the filler hole then fix the plug.

OEM 2008 Lincoln MKZ Differential Cover

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Differential Cover found

View related parts
2008 Lincoln MKZ Differential Cover, Rear Part Number: 7E5Z-4033-A
$88.04 MSRP: $128.15
You Save: $40.11 (32%)
ADD TO CART
Product Specifications
- Other Name: Cover - Rear Axle Housing; Differential Cover, Rear; Axle Cover; Rear Cover; Differential Assy Cover; Cover
- Position: Rear
- Base No.: 4033
- Item Weight: 4.40 Pounds
- Item Dimensions: 10.2 x 10.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-4033-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2008 Lincoln MKZ Submodels:
- Base | 6 Cyl 3.5 L GAS

2008 Lincoln MKZ Differential Cover

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Lincoln MKZ Differential Cover available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Lincoln MKZ Differential Cover as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Lincoln MKZ Differential Cover Parts Q&A

Q: How to Service and Repair the Differential Cover on 2008 Lincoln MKZ?
A: In order to fix the differential housing cover, ensure that you hoist the vehicle in neutral. Take off 10 bolts, de-fluidize, and clean. Use silicone sealant and place the cover in 15 minutes. Tighten the bolts with 23 Nm and fill the lubricant with 1.15L and level it 3-5 mm below the filler hole then fix the plug.