FordParts
My Garage
My Account
Cart
OEM 2008 Mercury Grand Marquis Brake Line
Brake Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
6 Brake Lines found
2008 Mercury Grand Marquis Flex Hose, Rear Passenger Side Part Number: 6W1Z-2A442-AA
$27.56 MSRP: $38.12You Save: $10.56 (28%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Passenger Side
- Base No.: 2A442
- Item Weight: 1.10 Pounds
- Item Dimensions: 7.4 x 6.3 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2A442-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Grand Marquis Brake Tube Part Number: 9W7Z-2C296-A
Product Specifications- Other Name: Tube Assembly - Brake; Brake Line
- Base No.: 2C296
- Item Weight: 1.70 Pounds
- Item Dimensions: 30.9 x 20.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9W7Z-2C296-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Hose Assembly; Brake Hydraulic Hose, Rear Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Rear Driver Side
- Base No.: 2A442
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.5 x 3.0 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2A442-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Left; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Driver Side
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 9.8 x 4.7 x 3.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2078-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Hose Assembly - Brake; Brake Hydraulic Hose, Front Right; Brake Hose; Brake Line; Hydraulic Hose
- Position: Front Passenger Side
- Base No.: 2078
- Item Weight: 1.10 Pounds
- Item Dimensions: 8.3 x 6.1 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2078-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Grand Marquis Brake Tube Part Number: 6W1Z-2C296-AA
Product Specifications- Other Name: Tube Assembly - Brake; Brake Line
- Manufacturer Note: w/Traction
- Base No.: 2C296
- Item Weight: 3.20 Pounds
- Item Dimensions: 20.4 x 6.0 x 26.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6W1Z-2C296-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2008 Mercury Grand Marquis Brake Line
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Grand Marquis Brake Line available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Grand Marquis Brake Line as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2008 Mercury Grand Marquis Brake Line Parts Q&A
- Q: How to Service and Repair the Front Brake Line Flexible Hose on 2008 Mercury Grand Marquis?A: Service and repair of front brake flexible hoses starts by using authorized brake fluid which meets manufacturer requirements yet excludes previously drained fluid for contamination prevention purposes. Service personnel should handle brake fluid with care since it damages paint and plastic elements so any contact must be washed off immediately by using water. Start the service only after you disable the fire suppression system to maintain safety. The first step is to remove the wheel and tire followed by breaking loose and tightening to 20 Nm (15 ft. lbs.) the brake flexible hose bracket bolt during reinstallation. The brake tube fitting needs to be disconnected from the brake flexible hose with a torque specification of 15 Nm (11 ft. lbs.) during the installation process. To proceed with the brake flexible hose removal process you need to dismount the brake caliper flow bolt while removing the brake flexible hose before discarding its two copper washers. During reinstallation install new copper washers in combination with 48 Nm (35 ft. lbs.) torque on the flow bolt before finishing the procedure by bleeding the brake caliper. The safety of the vehicle requires you to perform the fire suppression system repower after finishing all service procedures.