Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us

OEM 2008 Mercury Mountaineer Fuel Pressure Sensor

Fuel Tank Pressure Sensor
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pressure Sensor found

  • 2008 Mercury Mountaineer Fuel Pressure Sensor - 3F2Z-9G756-AC
    2008 Mercury Mountaineer Fuel Pressure Sensor Diagram - 3F2Z-9G756-AC
    View related parts

    2008 Mercury Mountaineer Pressure Sensor
    Part Number: 3F2Z-9G756-AC

    $84.64 MSRP: $139.27
    You Save: $54.63 (40%)
    Ships in 1 Business Day
    ADD TO CART
    Product Specifications
    • Other Name: Sensor - Fuel Injector Pressure; Fuel Tank Pressure Sensor; Fuel Pressure Damper; Fuel Pressure Sensor; Damper
    • Manufacturer Note: Also serviced in 9F792. Mounting screws W705870-S437, 6.8L
    • Base No.: 9F972
    • Item Weight: 0.30 Pounds
    • Item Dimensions: 6.3 x 4.1 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 3F2Z-9G756-AC
    • Warranty: This genuine part is guaranteed by Ford's factory warranty.
    More Info
    Fits the following 2008 Mercury Mountaineer Submodels:
    • Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L FLEX, 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2008 Mercury Mountaineer Fuel Pressure Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2008 Mercury Mountaineer Fuel Pressure Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2008 Mercury Mountaineer Fuel Pressure Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2008 Mercury Mountaineer Fuel Pressure Sensor Parts Questions & Experts Answers

  • Q: How to Service and Repair a Fuel Pressure Sensor Safely on 2008 Mercury Mountaineer?
    A: A battery ground cable disconnect is the first step to service the fuel tank pressure sensor since it minimizes fire or explosion risk from EVAP system fuel vapor. Perform the work in an area free of smoking materials. Also free from any open flame dangers. First remove the EVAP canister together with the fuel tank shield. Start by removing the electrical connector from the fuel tank pressure (FTP) sensor and then take out the three quick connect couplings of the FTP sensor and tube assembly from the fuel pump module and vapor vent valves. The FTP sensor and tube assembly removal process ends after reinstalling these components through their reverse removal procedure. Perform a leak test of the EVAP system and execute the evaporative emission repair verification drive cycle after installation to confirm proper operation.

Related 2008 Mercury Mountaineer Parts

Alternate Year Models

+
2007 Mercury Mountaineer Fuel Pressure Sensor 2009 Mercury Mountaineer Fuel Pressure Sensor