FordParts
My Garage
My Account
Cart
OEM 2009 Ford E-150 Dimmer Switch
Light Dimmer Switch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Dimmer Switches found
2009 Ford E-150 Instrument Light Rheostat Part Number: 9C2Z-11691-AA
$29.38 MSRP: $41.67You Save: $12.29 (30%)Product Specifications- Other Name: Resistor Assembly; Instrument Panel Dimmer Switch; Rheostat
- Manufacturer Note: BLACK
- Base No.: 11691
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-11691-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Headlamp Switch Part Number: 9C2Z-11654-AA
$28.63 MSRP: $45.45You Save: $16.82 (38%)Product Specifications- Other Name: Switch Assembly - Headlamps; Headlight Switch; Multi Purpose Switch
- Manufacturer Note: BLACK
- Base No.: 11654
- Item Weight: 0.30 Pounds
- Item Dimensions: 3.4 x 3.2 x 2.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9C2Z-11654-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Dimmer Switch
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-150 Dimmer Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-150 Dimmer Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford E-150 Dimmer Switch Parts Q&A
- Q: How to service and repair the headlamp dimmer switch and steering column multifunction switch on 2009 Ford E-150?A: Service or repair work on the headlamp dimmer switch gets started only after depowering the Supplemental Restraint System (SRS). Mount a punch to activate the lock cylinder release tab after you position the ignition key in the RUN switch. Follow by pulling out the cylinder. Detach the tilt release lever only if your vehicle has it. The upper and lower steering column shrouds are secured by three screws for removal as well as the two multifunction switch screws which require 3 Nm (27 lb-in) tightening upon replacement installation. To install reverse the removal process by reconnecting the electrical connectors of the multifunction switch. Finally, repower the SRS.