FordParts
My Garage
My Account
Cart
OEM 2009 Ford E-150 Radius Arm
Front Suspension Radius Arm- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Radius Arms found
2009 Ford E-150 Radius Arm, Front Passenger Side Part Number: BC2Z-3A360-B
$59.88 MSRP: $87.17You Save: $27.29 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Arm - Adjustment; Radius Arm, Front Right
- Position: Front Passenger Side
- Replaces: 8C2Z-3A360-BR
- Base No.: 3A360
- Item Weight: 19.90 Pounds
- Item Dimensions: 7.0 x 5.7 x 30.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC2Z-3A360-B
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Radius Arm, Front Driver Side Part Number: BC2Z-3A360-A
$55.42 MSRP: $80.67You Save: $25.25 (32%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Arm - Adjustment; Radius Arm, Front Left
- Position: Front Driver Side
- Replaces: 8C2Z-3A292-BL
- Base No.: 3A360
- Item Weight: 19.60 Pounds
- Item Dimensions: 6.8 x 5.7 x 31.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: BC2Z-3A360-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford E-150 Radius Arm
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford E-150 Radius Arm available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford E-150 Radius Arm as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford E-150 Radius Arm Parts Q&A
- Q: How to service the radius arm on 2009 Ford E-150?A: Service of the radius arm starts by taking off the front spring from the vehicle. The service starts with removing the shock absorber lower nut before disconnecting the absorber from the radius arm while installing a new nut then tightening it to 80 Nm (59 lb-ft). The service requires removing the radius arm rearward nut and flag bolt before installing the new components while torquing the nut to 350 Nm (258 lb-ft). You should first remove the radius arm-to-axle nut and bolt combined with the spring retainer and insulator before discarding those parts. You should tighten the new nut to 400 Nm when reattaching it (295 lb-ft). Proper inspection of the spring units and radius arm insulators must be followed by necessary replacements. The installation process should end by performing the reverse steps of removal but maintaining strict adherence to torque values for adequate retention of the components.