How to service and repair the power mirror switch on 2009 Ford Edge?

To replace the power mirror switch, you have to remove the control switch bezel of the front door. Then unplug the electrical connector at the exterior mirror control switch and take out the switch by pushing the two locking tabs. These steps can be reversed in order to install the new switch.

OEM 2009 Ford Edge Mirror Switch

Power Mirror Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Mirror Switch found

View related parts
2009 Ford Edge Mirror Switch, Front Driver Side Part Number: 8F9Z-17B676-A
$22.60 MSRP: $32.05
You Save: $9.45 (30%)
Product Specifications
- Other Name: Lever Assembly - Mirror Control; Door Mirror Switch, Front, Front Left; Power Mirror Switch; Lever
- Position: Front Driver Side
- Replaces: 5F9Z-17B676-AAA, 7F9Z-17B676-AA
- Base No.: 17B676
- Item Weight: 0.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8F9Z-17B676-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Edge Submodels:
- Limited, SE, SEL, SEL Plus, Sport | 4 Cyl 2.0 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2009 Ford Edge Mirror Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Edge Mirror Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Edge Mirror Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Edge Mirror Switch Parts Q&A

Q: How to service and repair the power mirror switch on 2009 Ford Edge?
A: To replace the power mirror switch, you have to remove the control switch bezel of the front door. Then unplug the electrical connector at the exterior mirror control switch and take out the switch by pushing the two locking tabs. These steps can be reversed in order to install the new switch.