How to Service the Crankshaft Position Sensor on 2009 Ford Expedition?

The vehicle should be in NEUTRAL position on a hoist before servicing the Crankshaft Position (CKP) Sensor. Start the service by taking off the accessory drive belt from the A/C compressor pulley followed by disconnecting both the A/C compressor electrical connector and the CKP sensor electrical connector. The service begins by removing the three bolts from the A/C compressor which you should then place aside. Next perform bolt removal followed by removing the CKP sensor while preparing the O-ring seal for installation by applying engine oil. The installation requires CKP sensor bolt torque set to 10 Nm (89 lb-in) while A/C compressor bolts should be tightened to 25 Nm (18 lb-ft). The final step requires using a scan tool to conduct the Misfire Monitor Neutral Profile Correction procedure according to the on-screen prompts.

OEM 2009 Ford Expedition Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Crankshaft Position Sensor found

View related parts
2009 Ford Expedition Crankshaft Position Sensor
Part Number: 1W7Z-6C315-AB
$41.11 MSRP: $65.27
You Save: $24.16 (38%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor - Crankshaft Position; Engine Crankshaft Position Sensor; Crankshaft Sensor; Position Sensor; Sensor - Crankshaft Position - Cps
- Manufacturer Note: Sensor asy. (Crankshaft position) #1W7E 6C315-AA
- Replaces: 1W7Z-6C315-AA
- Base No.: 6C315
- Item Weight: 0.30 Pounds
- Item Dimensions: 8.1 x 6.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 1W7Z-6C315-AB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Expedition Submodels:
- Eddie Bauer, EL Eddie Bauer, EL King Ranch, EL Limited, EL XL, EL XLT, Funkmaster Flex Edition, King Ranch, Limited, NBX, XL, XLS, XLT, XLT Sport | 8 Cyl 4.6 L GAS, 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS

2009 Ford Expedition Crankshaft Position Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Expedition Crankshaft Position Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Expedition Crankshaft Position Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Expedition Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to Service the Crankshaft Position Sensor on 2009 Ford Expedition?
A: The vehicle should be in NEUTRAL position on a hoist before servicing the Crankshaft Position (CKP) Sensor. Start the service by taking off the accessory drive belt from the A/C compressor pulley followed by disconnecting both the A/C compressor electrical connector and the CKP sensor electrical connector. The service begins by removing the three bolts from the A/C compressor which you should then place aside. Next perform bolt removal followed by removing the CKP sensor while preparing the O-ring seal for installation by applying engine oil. The installation requires CKP sensor bolt torque set to 10 Nm (89 lb-in) while A/C compressor bolts should be tightened to 25 Nm (18 lb-ft). The final step requires using a scan tool to conduct the Misfire Monitor Neutral Profile Correction procedure according to the on-screen prompts.