How to remove and install the rear floor Center Console Base on 2009 Ford Explorer?

The first step to remove the rear floor console starts with opening the armrest and then taking out the storage compartment insert. The next step involves removing four bolts which attach the rear floor console but requires tightening each bolt to 9 Nm (80 lb-in) during the installation process. When you remove the console it is essential to lift it vertically to protect the two plastic guide pegs which are located at the bottom. Users should disconnect the electrical connector before they can take out the rear floor console. Lower the console in a straight direction to properly place guide pegs where they belong before following the reversal steps of removal.

OEM 2009 Ford Explorer Center Console Base

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Center Console Bases found

View related parts
2009 Ford Explorer Rear Panel, Black Part Number: 7L2Z-78045E24-BD
$95.82 MSRP: $132.56
You Save: $36.74 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Front Rearward, Rear; Finish Panel; Rear Panel Assembly
- Position: Rear
- Base No.: <045E24
- Item Weight: 3.50 Pounds
- Item Dimensions: 18.9 x 10.2 x 9.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-78045E24-BD
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Rear Panel, Camel, Front Part Number: 7L2Z-78045E24-BC
$86.72 MSRP: $118.01
You Save: $31.29 (27%)
ADD TO CART
Product Specifications
- Other Name: Panel Assembly - Console; Console Panel, Front Rearward, Rear; Finish Panel; Rear Panel Assembly
- Position: Front
- Base No.: <045E24
- Item Weight: 3.40 Pounds
- Item Dimensions: 8.9 x 18.5 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-78045E24-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Finish Panel, Camel, Upper Part Number: 8L2Z-78045A76-BB
Product Specifications
- Other Name: Panel - Console; Console Panel, Upper; Console Panel; Top Finish Panel
- Manufacturer Note: (-C*)
- Position: Upper
- Base No.: <045A76
- Item Weight: 2.20 Pounds
- Item Dimensions: 17.5 x 11.1 x 7.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-78045A76-BB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Finish Panel, Black, Upper Part Number: 8L2Z-78045A76-BC
Product Specifications
- Other Name: Panel - Console; Console Panel, Upper; Console Panel; Top Finish Panel
- Manufacturer Note: (-W*)
- Position: Upper
- Base No.: <045A76
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-78045A76-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Console Panel, Camel, Rear Lower Part Number: 6L2Z-78045A36-AAB
Product Specifications
- Other Name: Receptacle And Housing; Center Console, Rear Lower; Receptacle And Housing Assembly - Ash
- Position: Rear Lower
- Base No.: <045A36
- Item Weight: 10.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-78045A36-AAB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Console Panel, Camel, Front Part Number: 8L2Z-78045A36-GB
Product Specifications
- Other Name: Panel Assembly - Console; Center Console, Center, Front; Console Body
- Manufacturer Note: (-C*)
- Position: Front
- Base No.: <045A36
- Item Weight: 10.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-78045A36-GB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Console Panel, Camel Part Number: 8L2Z-78045A76-DA
Product Specifications
- Other Name: Panel - Console; Top Finish Panel
- Manufacturer Note: (-C*)
- Base No.: <045A76
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-78045A76-DA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Console Panel, Black Part Number: 8L2Z-78045A76-DB
Product Specifications
- Other Name: Panel - Console; Top Finish Panel
- Manufacturer Note: (-W*)
- Base No.: <045A76
- Item Weight: 2.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-78045A76-DB
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Console Panel, Black, Front Part Number: 8L2Z-78045A36-GC
Product Specifications
- Other Name: Panel Assembly - Console; Center Console, Center, Front; Console Body
- Manufacturer Note: (-W*)
- Position: Front
- Base No.: <045A36
- Item Weight: 10.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L2Z-78045A36-GC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Console Panel, Camel, Rear Lower Part Number: 7L2Z-78045A36-AA
Product Specifications
- Other Name: Receptacle And Housing Assembly - Antenna; Center Console, Rear Lower; Receptacle And Housing Assembly - Ash
- Position: Rear Lower
- Base No.: <045A36
- Item Weight: 10.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L2Z-78045A36-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Ford Explorer Console Panel, Black, Rear Lower Part Number: 6L2Z-78045A36-AAC
Product Specifications
- Other Name: Receptacle And Housing Assembly - Antenna; Center Console, Rear Lower; Receptacle And Housing Assembly - Ash
- Position: Rear Lower
- Base No.: <045A36
- Item Weight: 10.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-78045A36-AAC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Explorer Submodels:
- Eddie Bauer, Limited, XLS, XLT | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2009 Ford Explorer Center Console Base

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Center Console Base available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Center Console Base as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Explorer Center Console Base Parts Q&A

Q: How to remove and install the rear floor Center Console Base on 2009 Ford Explorer?
A: The first step to remove the rear floor console starts with opening the armrest and then taking out the storage compartment insert. The next step involves removing four bolts which attach the rear floor console but requires tightening each bolt to 9 Nm (80 lb-in) during the installation process. When you remove the console it is essential to lift it vertically to protect the two plastic guide pegs which are located at the bottom. Users should disconnect the electrical connector before they can take out the rear floor console. Lower the console in a straight direction to properly place guide pegs where they belong before following the reversal steps of removal.