FordParts
My Garage
My Account
Cart
OEM 2009 Ford Explorer Sport Trac EGR Tube
EGR Hose- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 EGR Tubes found
2009 Ford Explorer Sport Trac EGR Tube Part Number: 5L2Z-9E469-A
Product Specifications- Other Name: Tube - EGR Valve To Exhaust Manifold; Exhaust Gas Recirculation (EGR) Tube; Tube
- Replaces: 4L2Z-9E469-BA
- Base No.: 9E469
- Item Weight: 0.70 Pounds
- Item Dimensions: 20.1 x 8.0 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5L2Z-9E469-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Product Specifications- Other Name: Tube - Connecting; Exhaust Gas Recirculation (EGR) Valve Spacer Plate; EGR Tube Connector; Connector
- Base No.: 9E470
- Item Weight: 1.10 Pounds
- Item Dimensions: 6.2 x 4.6 x 3.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4L2Z-9E470-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Explorer Sport Trac EGR Tube
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Sport Trac EGR Tube available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Sport Trac EGR Tube as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Explorer Sport Trac EGR Tube Parts Q&A
- Q: How to service the EGR Tube for the 4.0L SOHC engine on 2009 Ford Explorer Sport Trac?A: The service of the Exhaust Gas Recirculation (EGR) System Module Tube for the 4.0L SOHC engine starts with disconnecting the upper tube fitting which connects the EGR system module to the exhaust manifold. The fitting installation requires torque to reach 40 Nm with a final tightness of 30 lb-ft (30 in-lb). Proceed to disconnect the lower fitting of the EGR system module-to-exhaust manifold tube and take out the tube. Repeat the fitting tightening procedure at 40 Nm (30 lb-ft) for the lower connection then follow the opposite removal steps to finish the installation.