FordParts
My Garage
My Account
Cart
OEM 2009 Ford Explorer Thermostat
Engine Coolant Thermostat- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Thermostats found
2009 Ford Explorer Thermostat Part Number: 7L3Z-8575-E
$20.68 MSRP: $32.00You Save: $11.32 (36%)Ships in 1 Business DayProduct Specifications- Other Name: Thermostat Assembly; Engine Coolant Thermostat; Thermostat, Coolant
- Replaces: 7L3Z-8575-D, 7L3Z-8575-B, AL3Z-8575-B, RT-1196, RT-1230, 3L3Z-8575-AA, 3L3Z-8575-AC, 7L3Z-8575-C, AL3Z-8575-A, RT-1204, RT-1234, RT-1178, RT-1229, RT-1165
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7L3Z-8575-E
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Explorer Thermostat Part Number: 2L2Z-8575-AA
$21.07 MSRP: $33.45You Save: $12.38 (38%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Thermostat Assembly; Engine Coolant Thermostat
- Replaces: 1L2Z-8575-AA
- Base No.: 8575
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.2 x 2.6 x 3.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 2L2Z-8575-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Ford Explorer Thermostat
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Explorer Thermostat available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Explorer Thermostat as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Ford Explorer Thermostat Parts Q&A
- Q: How to service the thermostat on a 4.0L SOHC engine on 2009 Ford Explorer?A: An engine cooling system drain operation serves as the first step in servicing the 4.0L SOHC thermostat. First you need to remove the clamp yet maintain the upper radiator hose connection to the thermostat housing cover. Proceed to remove the bolts which secure the thermostat housing cover while tightening each bolt to 10 Nm (89 lb-in) during reinstallation. The first step is to remove the housing cover followed by extraction of the thermostat. Check the O-ring seal of the thermostat housing cover then replace it with a new one if needed. The installation ends with putting back the replacement thermostat along with housing cover by following the reverse order of removal.