How to service the Light Control Module for exterior lighting on 2009 Ford Flex?

To install the exterior lighting module, you will have to take off the headlamp assembly first. Then loosen four screws which are attached to the ballast and disconnect the electrical connectors. The procedure to re install the ballast is simple, do the reverse of the steps that were used to remove it.

OEM 2009 Ford Flex Light Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Light Control Modules found

View related parts
2009 Ford Flex Control Module, Front Part Number: DL3Z-13C170-A
$253.11 MSRP: $405.45
You Save: $152.34 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Ballast Assembly; High Intensity Discharge (HID) Lighting Ballast, Front; Hid Bulb Ballast; Bulb Ballast; Ballast; Module; Resistor
- Position: Front
- Replaces: 8A5Z-13C170-A, CJ5Z-13C170-A
- Base No.: 13C170
- Item Weight: 0.80 Pounds
- Item Dimensions: 6.4 x 6.1 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DL3Z-13C170-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Flex Submodels:
- Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS
View related parts
2009 Ford Flex Control Module Part Number: 8S4Z-13C788-A
$177.87 MSRP: $293.33
You Save: $115.46 (40%)
ADD TO CART
Product Specifications
- Other Name: Processor - Lighting Control; Lighting Control Module; Controller; Module; Module - Lighting Control
- Manufacturer Note: Module - Lighting Control
- Base No.: 13C788
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8S4Z-13C788-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Flex Submodels:
- Limited, SE, SEL, Titanium | 6 Cyl 3.5 L GAS

2009 Ford Flex Light Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Flex Light Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Flex Light Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Flex Light Control Module Parts Q&A

Q: How to service the Light Control Module for exterior lighting on 2009 Ford Flex?
A: To install the exterior lighting module, you will have to take off the headlamp assembly first. Then loosen four screws which are attached to the ballast and disconnect the electrical connectors. The procedure to re install the ballast is simple, do the reverse of the steps that were used to remove it.