How to service the rear window wiper motor on 2009 Ford Taurus?

Service of the rear wiper motor requires beginning with pivot arm removal from the rear wiper. Proceed with the removal of the liftgate trim panel. You must disconnect the electrical connector from the rear window wiper motor assembly before removing the three bolts while tightening them to 8 Nm during installation. Conclude the installation by performing the reverse actions of removal.

OEM 2009 Ford Taurus Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wiper Motor found

View related parts
2009 Ford Taurus Wiper Motor Part Number: 8G1Z-17508-A
$117.60 MSRP: $160.03
You Save: $42.43 (27%)
ADD TO CART
Product Specifications
- Other Name: Motor Assembly - Wiper; Windshield Wiper Motor
- Base No.: 17508
- Item Weight: 3.40 Pounds
- Item Dimensions: 10.2 x 6.0 x 8.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8G1Z-17508-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Ford Taurus Submodels:
- Limited, SE, SEL, SHO | 6 Cyl 3.5 L GAS

2009 Ford Taurus Wiper Motor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Ford Taurus Wiper Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Ford Taurus Wiper Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Ford Taurus Wiper Motor Parts Q&A

Q: How to service the rear window wiper motor on 2009 Ford Taurus?
A: Service of the rear wiper motor requires beginning with pivot arm removal from the rear wiper. Proceed with the removal of the liftgate trim panel. You must disconnect the electrical connector from the rear window wiper motor assembly before removing the three bolts while tightening them to 8 Nm during installation. Conclude the installation by performing the reverse actions of removal.