How to Remove and Replace the Flywheel on 2009 Lincoln MKS?

In order to replace flexplate, make sure that the vehicle is in neutral and on a hoist. Take out the transaxle, observe the offset hole, so you can install it correctly. When the bolts are removed, remove the flexplate. Installation to be reinstalled with tightening bolts of 80 Nm (59 lb-ft) and re-follow the installation steps.

OEM 2009 Lincoln MKS Flywheel

Clutch Flywheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Flywheel found

View related parts
2009 Lincoln MKS Drive Plate Part Number: 7T4Z-6375-AA
$54.72 MSRP: $78.28
You Save: $23.56 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Flywheel Assembly; Automatic Transmission Flexplate; Flywheel
- Manufacturer Note: 3 Bolt Converter
- Replaces: AA5Z-7000-B, AA5Z-7000-D
- Base No.: 6375
- Item Weight: 6.10 Pounds
- Item Dimensions: 2.4 x 15.4 x 15.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7T4Z-6375-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKS Submodels:
- Base, EcoBoost | 6 Cyl 3.5 L GAS, 6 Cyl 3.7 L GAS

2009 Lincoln MKS Flywheel

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKS Flywheel available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKS Flywheel as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKS Flywheel Parts Q&A

Q: How to Remove and Replace the Flywheel on 2009 Lincoln MKS?
A: In order to replace flexplate, make sure that the vehicle is in neutral and on a hoist. Take out the transaxle, observe the offset hole, so you can install it correctly. When the bolts are removed, remove the flexplate. Installation to be reinstalled with tightening bolts of 80 Nm (59 lb-ft) and re-follow the installation steps.