How to service and repair the steering angle sensor on 2009 Lincoln MKZ?

When fixing the steering angle sensor, you have to pull out the steering column shroud and unplug the electrical connector of the steering sensor. Unscrew the two bolts that hold the sensor, then use the same process to install the new sensor. Lastly, calibrate the new sensor to the ABS module with a scan tool, as directed.

OEM 2009 Lincoln MKZ Steering Angle Sensor

Steering Column Angle Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Angle Sensor found

View related parts
2009 Lincoln MKZ Angle Sensor Part Number: 6L2Z-3F818-AA
$138.98 MSRP: $202.30
You Save: $63.32 (32%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Steering Rotation; Wheel Position, Yaw, Speed, and Angle Sensors.; Steering Sensor Assembly; Sensor
- Manufacturer Note: Steering Angle
- Base No.: 3F818
- Item Weight: 0.30 Pounds
- Item Dimensions: 4.1 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-3F818-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln MKZ Submodels:
- Base | 6 Cyl 3.5 L GAS

2009 Lincoln MKZ Steering Angle Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln MKZ Steering Angle Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln MKZ Steering Angle Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln MKZ Steering Angle Sensor Parts Q&A

Q: How to service and repair the steering angle sensor on 2009 Lincoln MKZ?
A: When fixing the steering angle sensor, you have to pull out the steering column shroud and unplug the electrical connector of the steering sensor. Unscrew the two bolts that hold the sensor, then use the same process to install the new sensor. Lastly, calibrate the new sensor to the ABS module with a scan tool, as directed.