How to Remove and Replace the Front Drive Shaft on 2009 Lincoln Navigator?

You should begin the front driveshaft replacement process by positioning the vehicle in neutral gear while using a hoist. Index-mark the front flange to the pinion flange and the rear flange to the transfer case flange. The replacement process requires discarding six bolts and three washers that join the transfer case flange and rear flange while you should tighten these bolts to 55 Nm (41 lb-ft) during installation. Tighten the six front flange to pinion flange bolts with 55 Nm (41 lb-ft) torque after installation and discard these bolts together with the two washers. The technician should discard 4 stabilizer bracket nuts and let the stabilizer bar drop down before re-tightening them to 55 Nm (41 lb-ft). Take the front driveshaft out of the vehicle after which you should perform the installation procedure in reverse order.

OEM 2009 Lincoln Navigator Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Drive Shafts found

View related parts
2009 Lincoln Navigator Drive Shaft, Front Part Number: AL3Z-4A376-D
$556.15 MSRP: $753.85
You Save: $197.70 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Front; Driveshaft
- Position: Front
- Replaces: 7L1Z-4A376-B, AL3Z-4A376-C
- Base No.: 4A376
- Item Weight: 21.20 Pounds
- Item Dimensions: 5.9 x 5.9 x 40.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: AL3Z-4A376-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Lincoln Navigator Drive Shaft, Rear Part Number: DL1Z-4602-C
$622.46 MSRP: $851.23
You Save: $228.77 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: 7L1Z-4602-A, DL1Z-4602-A
- Base No.: 4602
- Item Weight: 25.90 Pounds
- Item Dimensions: 59.7 x 7.3 x 6.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DL1Z-4602-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
- Base, L, L Luxury, L Ultimate, Luxury, Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Lincoln Navigator Drive Shaft, Rear Part Number: DL1Z-4602-D
$648.45 MSRP: $886.77
You Save: $238.32 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Drive Shaft, Rear; Driveshaft
- Position: Rear
- Replaces: DL1Z-4602-B, 7L1Z-4602-B
- Base No.: 4602
- Item Weight: 30.30 Pounds
- Item Dimensions: 36.1 x 5.0 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: DL1Z-4602-D
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
- L, L Luxury, L Ultimate | 8 Cyl 5.4 L FLEX, 8 Cyl 5.4 L GAS
View related parts
2009 Lincoln Navigator Drive Shaft Part Number: 9L1Z-4R602-H
$836.55 MSRP: $1144.00
You Save: $307.45 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 9L1Z-4R602-F, 9L1Z-4R602-C, 9L1Z-4R602-D
- Base No.: 4R602
- Item Weight: 42.20 Pounds
- Item Dimensions: 36.4 x 5.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-4R602-H
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
- Base, L | 8 Cyl 5.4 L FLEX
View related parts
2009 Lincoln Navigator Drive Shaft Part Number: 9L1Z-4R602-G
$836.55 MSRP: $1144.00
You Save: $307.45 (27%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly - Drive; Driveshaft
- Replaces: 9L1Z-4R602-E, 9L1Z-4R602-B
- Base No.: 4R602
- Item Weight: 39.80 Pounds
- Item Dimensions: 35.8 x 5.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 9L1Z-4R602-G
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Navigator Submodels:
- Base, L | 8 Cyl 5.4 L FLEX

2009 Lincoln Navigator Drive Shaft

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Navigator Drive Shaft available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Navigator Drive Shaft as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Navigator Drive Shaft Parts Q&A

Q: How to Remove and Replace the Front Drive Shaft on 2009 Lincoln Navigator?
A: You should begin the front driveshaft replacement process by positioning the vehicle in neutral gear while using a hoist. Index-mark the front flange to the pinion flange and the rear flange to the transfer case flange. The replacement process requires discarding six bolts and three washers that join the transfer case flange and rear flange while you should tighten these bolts to 55 Nm (41 lb-ft) during installation. Tighten the six front flange to pinion flange bolts with 55 Nm (41 lb-ft) torque after installation and discard these bolts together with the two washers. The technician should discard 4 stabilizer bracket nuts and let the stabilizer bar drop down before re-tightening them to 55 Nm (41 lb-ft). Take the front driveshaft out of the vehicle after which you should perform the installation procedure in reverse order.