How to Service and Repair the Exterior Light Control Module on 2009 Lincoln Town Car?

Service and repairs of the exterior lighting module start with removing the headlamp assembly. Begin by eliminating the 5 screws holding the headlamp bulb protective cover and removal of its electrical connectors. Follow the removal process by taking out the three ballast-retaining screws. The seat belt equipment installation requires following the reverse order of the removal process.

OEM 2009 Lincoln Town Car Light Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Light Control Module found

View related parts
2009 Lincoln Town Car Lighting Control Module Part Number: 8W7Z-13C788-C
Product Specifications
- Other Name: Processor - Lighting Control; Module - Lighting Control
- Manufacturer Note: Service Kit
- Replaces: 8W7Z-13C788-A, 8W7Z-13C788-B
- Base No.: 13C788
- Item Weight: 2.10 Pounds
- Item Dimensions: 8.1 x 6.0 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8W7Z-13C788-C
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Lincoln Town Car Submodels:
- Executive, Executive L, Signature L, Signature Limited | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Lincoln Town Car Light Control Module

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Lincoln Town Car Light Control Module available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Lincoln Town Car Light Control Module as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Lincoln Town Car Light Control Module Parts Q&A

Q: How to Service and Repair the Exterior Light Control Module on 2009 Lincoln Town Car?
A: Service and repairs of the exterior lighting module start with removing the headlamp assembly. Begin by eliminating the 5 screws holding the headlamp bulb protective cover and removal of its electrical connectors. Follow the removal process by taking out the three ballast-retaining screws. The seat belt equipment installation requires following the reverse order of the removal process.