OEM 2009 Lincoln Town Car Wheel Hub

2009 Lincoln Town Car Wheel Hub Parts Questions & Experts Answers

• Q: How to service the wheel hub in the front suspension on 2009 Lincoln Town Car?

  A: You should start your wheel hub front suspension servicing by taking off the wheel along with the tire. Secure the brake hose by removing the bolts from the caliper and anchor plate assembly then support the whole unit with mechanic's wire. The caliper and anchor plate assembly needs to be tightened to 160 Nm (118 lb-ft) when reinstalling. After disassembling brake discs the vehicle must be opened by peeling back the rubber splash shield for wheel speed sensor electrical connector detachment. During replacement always discard both wheel bearing and wheel hub bolts before tightening new hardware to values of 120 Nm (89 lb-ft). Directed wheel speed sensor wiring should lead in front of the stabilizer bar link because it could get damaged. Make sure to check that the wheel speed sensor electrical connector provides a full click sound when properly installed while also ensuring correct placement of the rubber splash shield. You should finish the installation by undoing the steps needed for the removal process.