How to safely service the rear ABS sensor on 2009 Mercury Grand Marquis?

Service of the rear ABS sensor must start with deactivating the fire suppression system due to potential serious injury risks. Service of the rear ABS sensor begins by pulling out the rear seat padding followed by disconnecting the electrical connection from the sensor. Feed the sensor harness grommet through the passenger floor area before taking out wheel and tire components. The ABS sensor harness clips must be disconnected before removing the rear ABS sensor bolt and finally taking out the sensor itself. After attaching the new sensor you should torque it to 7 Nm with a 62 pound-inch torque setting. Repower your vehicle following the safety procedures and warnings while taking all necessary precautions against personal injury if it has a fire suppression system.

OEM 2009 Mercury Grand Marquis ABS Sensor

ABS Wheel Speed Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 ABS Sensors found

View related parts
2009 Mercury Grand Marquis ABS Sensor Part Number: 6W1Z-2C204-A
Product Specifications
- Other Name: Wire Assembly - Jumper; Wheel Bearing and Hub Assembly; Wheel Bear & Hub Assembly; Speed Sensor; Front Speed Sensor
- Base No.: 2C204
- Item Weight: 0.50 Pounds
- Item Dimensions: 8.3 x 4.6 x 3.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 6W1Z-2C204-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Grand Marquis Submodels:
- GS, LS | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS
View related parts
2009 Mercury Grand Marquis ABS Sensor, Rear Part Number: 8W1Z-2C190-A
Product Specifications
- Other Name: Sensor Assembly; ABS Wheel Speed Sensor, Rear, Rear Left, Rear Right; Rear Speed Sensor; ABS Wheel Speed Sensor
- Manufacturer Note: Rear
- Position: Rear
- Replaces: 6W1Z-2C190-A, 5W1Z-2C190-AA
- Base No.: 2C190
- Item Weight: 0.70 Pounds
- Item Dimensions: 7.6 x 2.6 x 7.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 8W1Z-2C190-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Grand Marquis Submodels:
- GS, GSL, Limited Edition, LS, Ultimate Edition | 8 Cyl 4.6 L FLEX, 8 Cyl 4.6 L GAS

2009 Mercury Grand Marquis ABS Sensor

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Grand Marquis ABS Sensor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Grand Marquis ABS Sensor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Grand Marquis ABS Sensor Parts Q&A

Q: How to safely service the rear ABS sensor on 2009 Mercury Grand Marquis?
A: Service of the rear ABS sensor must start with deactivating the fire suppression system due to potential serious injury risks. Service of the rear ABS sensor begins by pulling out the rear seat padding followed by disconnecting the electrical connection from the sensor. Feed the sensor harness grommet through the passenger floor area before taking out wheel and tire components. The ABS sensor harness clips must be disconnected before removing the rear ABS sensor bolt and finally taking out the sensor itself. After attaching the new sensor you should torque it to 7 Nm with a 62 pound-inch torque setting. Repower your vehicle following the safety procedures and warnings while taking all necessary precautions against personal injury if it has a fire suppression system.