How to service and repair the turn signal switch on 2009 Mercury Mariner?

The repair and servicing of the turn signal switch begins with steering column opening trim removal and the subsequent removal of the three lower steering column shroud screws. Start by removing steering column shrouds at both upper and lower positions before unfastening the two multifunction switch screws. Remove the multifunction switch electrical connection followed by removing the switch from its installation. The installation of the new switch requires following the opposite steps of removal.

OEM 2009 Mercury Mariner Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Turn Signal Switch found

View related parts
2009 Mercury Mariner Multifunction Switch
Part Number: 8L8Z-13K359-AA
Product Specifications
- Other Name: Switch Assembly - Direction Indicator; Turn Signal & Combination Lever; Combination Switch; Multi Purpose Switch; Turn/Wiper Switch
- Base No.: 13K359
- Item Weight: 0.80 Pounds
- Item Dimensions: 10.5 x 4.6 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8L8Z-13K359-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Mariner Submodels:
- Base, Hybrid, Premier | 4 Cyl 2.3 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS

2009 Mercury Mariner Turn Signal Switch

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mariner Turn Signal Switch available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mariner Turn Signal Switch as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Mariner Turn Signal Switch Parts Questions & Experts Answers

Q: How to service and repair the turn signal switch on 2009 Mercury Mariner?
A: The repair and servicing of the turn signal switch begins with steering column opening trim removal and the subsequent removal of the three lower steering column shroud screws. Start by removing steering column shrouds at both upper and lower positions before unfastening the two multifunction switch screws. Remove the multifunction switch electrical connection followed by removing the switch from its installation. The installation of the new switch requires following the opposite steps of removal.