How to remove and replace the clutch disc and pressure plate on 2009 Mercury Milan?

To change the clutch disc and the pressure plate, take out the transaxle and examine the pressure plate whether it is damaged. Inspect the flywheel and the clutch disc and verify that they have no defects, wipe them down, and replace defective parts. Apply grease on the parts they will require during reinstallation, and install the transaxle again.

OEM 2009 Mercury Milan Clutch Disc

Friction Disc

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Clutch Disc found

View related parts
2009 Mercury Milan Pressure Plate Part Number: 7E5Z-7B546-A
Product Specifications
- Other Name: Clutch Assembly; Transmission Clutch Friction Plate; Transmission Clutch Pressure Plate; Clutch Kit; Disc
- Manufacturer Note: All Components Must Be Replaced When Using This Service Kit
- Replaces: 6E5Z-7B546-AA, 6E5Z-7550-AARM, 6E5Z-7B546-AB, 7E5Z-7563-A, 6E5Z-7563-A, 7E5Z-7550-A
- Base No.: 7L596A
- Item Weight: 10.00 Pounds
- Item Dimensions: 19.6 x 9.8 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-7B546-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Milan Submodels:
- Base, Premier | 4 Cyl 2.3 L GAS

2009 Mercury Milan Clutch Disc

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Milan Clutch Disc available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Milan Clutch Disc as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Milan Clutch Disc Parts Q&A

Q: How to remove and replace the clutch disc and pressure plate on 2009 Mercury Milan?
A: To change the clutch disc and the pressure plate, take out the transaxle and examine the pressure plate whether it is damaged. Inspect the flywheel and the clutch disc and verify that they have no defects, wipe them down, and replace defective parts. Apply grease on the parts they will require during reinstallation, and install the transaxle again.