FordParts
My Garage
My Account
Cart
OEM 2009 Mercury Milan Fan Motor
Cooling Fan Motor- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fan Motor found
2009 Mercury Milan Fan & Motor Part Number: 7E5Z-8C607-A
Product Specifications- Other Name: Motor And Fan Assembly - Engine Cooling; Dual Radiator and Condenser Fan; Cooling Fan Assembly; Fan Blade; Fan Assembly
- Replaces: 6E5Z-8C607-AA
- Base No.: 8C607
- Item Weight: 10.90 Pounds
- Item Dimensions: 6.1 x 23.2 x 33.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 7E5Z-8C607-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Milan Fan Motor
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Milan Fan Motor available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Milan Fan Motor as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Mercury Milan Fan Motor Parts Q&A
- Q: How to service and repair the radiator cooling fan motor and shroud for 2.3L, 3.0L, and 3.5L engines on 2009 Mercury Milan?A: Start radiator cooling fan motor and shroud optimization procedures for 2.3L, 3.0L and 3.5L engines by setting the vehicle on a hoist in neutral position. The service procedure for 2.3L engines requires generator air inlet duct removal whereas 3.5L engines need air cleaner and bracket bolt removal with a tight 10 Nm (89 lb-in) clamp after installation. All vehicles require the detaching of three block heater wiring retainers from the cooling fan motor and shroud before setting them aside. Caretakers should begin by taking out the splash shield before unfastening the lower radiator hose from the cooling fan motor and shroud. The retainer on the lower radiator hose needs detaching on 3.0L and 3.5L engine models. The technician should start by disconnecting transmission cooler tubes from the fan motor assembly and shroud before removing the wiring harness securing clamps and placing them aside. Remove the cooling fan electric connector first before releasing the two tabs to take out the cooling fan motor and shroud unit. The completion of the service requires performing the installation steps in reverse order.