FordParts
My Garage
My Account
Cart
OEM 2009 Mercury Mountaineer Canister Purge Valve
Vapor Canister Purge Valve EVAP- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Canister Purge Valves found
2009 Mercury Mountaineer Purge Solenoid Part Number: 6L2Z-9F945-AA
$84.79 MSRP: $123.42You Save: $38.63 (32%)Ships in 1 Business DayProduct Specifications- Other Name: Solenoid Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Vapor Canister; Vent Control Solenoid; Solenoid
- Manufacturer Note: All 3.0L
- Replaces: 5U5Z-9F945-GA
- Base No.: 9F945
- Item Weight: 1.00 Pounds
- Item Dimensions: 5.7 x 3.8 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-9F945-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Mountaineer Solenoid Valve Part Number: 4U5Z-9J451-BA
$49.08 MSRP: $76.60You Save: $27.52 (36%)Product Specifications- Other Name: Valve Assembly; Vapor Canister Purge Solenoid; Vapor Canister Vent Solenoid; Canister Purge Valve; Purge Valve; Purge Solenoid
- Base No.: 9C915
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4U5Z-9J451-BA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
2009 Mercury Mountaineer Canister Purge Valve
If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Mountaineer Canister Purge Valve available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Mountaineer Canister Purge Valve as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.
2009 Mercury Mountaineer Canister Purge Valve Parts Q&A
- Q: How to service the Evaporative Emission Canister Purge Valve on 2009 Mercury Mountaineer?A: The service procedure for the evaporative emission canister purge valve requires a vehicle in neutral position while being supported on a hoist. The battery ground cable should be disconnected first to avoid electrical dangers. The service starts by removing two vapor tube quick connect couplings from the evap canister purge valve and then disconnecting its electrical connector. The valve must be detached from its bracket while you remove it from the vehicle. The installation of the new valve requires following the steps in reverse order. It is essential to perform an evaporative emission system leak test on the installation system to verify proper functionality.