How to service and repair the windshield washer reservoir on 2009 Mercury Sable?

In order to service the windshield washer reservoir, lift the vehicle in neutral, disconnect electrical connectors, remove the splash shields required, and lift the vehicle. Installation: Drain the reservoir, remove it and tighten the fasteners to 7 Nm. Do not use the washer pumps when empty because this may cause the pump to fail. Turn the process round to finish.

OEM 2009 Mercury Sable Washer Reservoir

Windshield Washer Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Washer Reservoir found

View related parts
2009 Mercury Sable Washer Reservoir Part Number: 8A5Z-17618-A
Product Specifications
- Other Name: Reservoir - Windshield Washer; Washer Fluid Reservoir; Windshield Washer Reservoir; Reservoir Assembly
- Replaces: 8G1Z-17618-A, 8G1Z-17618-B
- Base No.: 17618
- Item Weight: 2.20 Pounds
- Item Dimensions: 7.4 x 27.6 x 12.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 8A5Z-17618-A
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2009 Mercury Sable Submodels:
- Base, Premier | 6 Cyl 3.5 L GAS

2009 Mercury Sable Washer Reservoir

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2009 Mercury Sable Washer Reservoir available at FordPartsDeal.com. You can confidently purchase our OEM 2009 Mercury Sable Washer Reservoir as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2009 Mercury Sable Washer Reservoir Parts Q&A

Q: How to service and repair the windshield washer reservoir on 2009 Mercury Sable?
A: In order to service the windshield washer reservoir, lift the vehicle in neutral, disconnect electrical connectors, remove the splash shields required, and lift the vehicle. Installation: Drain the reservoir, remove it and tighten the fasteners to 7 Nm. Do not use the washer pumps when empty because this may cause the pump to fail. Turn the process round to finish.