How to Properly Service and Repair the Front Cross-Member on 2010 Mercury Mountaineer?

In order to service and repair the crossmember 1B, the vehicle must be lifted on a hoist in neutral. Begin by taking off the 4 bolts and 4 nuts of the crossmember. When these are removed, remove the 1B crossmember. Installation To install, retrace the steps of removal and tighten the bolts to 103 Nm (76 lb-ft).

OEM 2010 Mercury Mountaineer Front Cross-Member

Front Engine Cross Member

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Front Cross-Member found

View related parts
2010 Mercury Mountaineer Front Crossmember, Center Part Number: 6L2Z-7810624-AA
Product Specifications
- Other Name: Member Assembly - Cross Center; Floor Pan Crossmember; Center Reinforcement; Crossmember; Member Assembly - Cross - Center
- Position: Center
- Base No.: <10624
- Item Weight: 12.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 6L2Z-7810624-AA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
More Info
Fits the following 2010 Mercury Mountaineer Submodels:
- Base, Convenience, Luxury, Premier | 6 Cyl 4.0 L GAS, 8 Cyl 4.6 L GAS

2010 Mercury Mountaineer Front Cross-Member

If you're seeking quality and affordability, look no further than our extensive inventory of genuine 2010 Mercury Mountaineer Front Cross-Member available at FordPartsDeal.com. You can confidently purchase our OEM 2010 Mercury Mountaineer Front Cross-Member as they are supported by the manufacturer's warranty and our hassle-free return policy, alongside the benefit of our fast delivery service.

2010 Mercury Mountaineer Front Cross-Member Parts Q&A

Q: How to Properly Service and Repair the Front Cross-Member on 2010 Mercury Mountaineer?
A: In order to service and repair the crossmember 1B, the vehicle must be lifted on a hoist in neutral. Begin by taking off the 4 bolts and 4 nuts of the crossmember. When these are removed, remove the 1B crossmember. Installation To install, retrace the steps of removal and tighten the bolts to 103 Nm (76 lb-ft).