How to service the Speed Sensor on the Turbine Shaft on Ford Contour?

A proper service of turbine shaft speed (TSS) sensor requires vehicle elevation and support with a drain pan positioned beneath the sensor location. Separate the electrical connector before removing the bolt in order to extract the TSS sensor. The sensor bore requires inspection before examining the O-ring seal for damage. If you find any signs of damage replace the O-ring. The O-ring seal needs a thin application of petroleum jelly before installing the new sensor. You must install the newly put-in TSS sensor after you re-attach its electrical connector. Remove the drain pan then position the vehicle into lower position after installation. Add new transmission fluid either from Motorcraft Mercon (R) Multipurpose automatic transmission fluid or an equivalent product with Mercon (R) specifications when checking and verifying the transmission fluid level. Before finishing the procedure start the engine while moving the transaxle range selector lever through its complete gear range.

OEM Ford Contour Speed Sensor

Speed Control Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Speed Sensors found

View related parts
Ford Contour Vehicle Speed Sensor Part Number: F5RZ-9E731-CB
$23.50 MSRP: $32.51
You Save: $9.01 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Tripminder
- Replaces: F5RZ-9E731-CA
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995 Ford Contour | GL, GL Sport, LX, LX Sport, SE | 2.5L V6, 6 Cyl 2.5 L GAS
View related parts
Ford Contour Speed Sensor Part Number: F5RZ-9E731-BD
$36.86 MSRP: $50.99
You Save: $14.13 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Speed; Vehicle Speed Sensor
- Replaces: F5RZ-9E731-BC
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2000 Ford Contour | GL, GL Sport, LX, LX Sport, SE, SVT, Sport | 6 Cyl 2.5 L GAS
View related parts
Ford Contour Speed Sensor Part Number: F5RZ-9E731-AC
$69.41 MSRP: $96.02
You Save: $26.61 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly - Speed; Vehicle Speed Sensor
- Warranty: This genuine part is guaranteed by Ford's factory warranty.
Fits the following Vehicles:
- 1995-2000 Ford Contour | Base, GL, GL Sport, LX, LX Sport, SE, SVT, Sport | 4 Cyl 2.0 L BI-FUEL, 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS

Ford Contour Speed Sensor

OEM Speed Sensor boasts unmatched quality. Each part goes through full quality checks. They adhere to Ford's official factory standards. These steps remove flaws and inconsistencies. So you can get Speed Sensor with long life and a perfect fit. Come to our website and find genuine Ford Contour parts. We keep a wide inventory of OEM Contour parts at the highly affordable prices. It's easy to search, compare, and pick what you need. You'll love the clear info and simple checkout. We offer top-rated customer service, and we reply fast. We also ship promptly to ensure your order arrives on time.

Ford Contour Speed Sensor Parts and Q&A

Speed Sensor
F5RZ-9E731-AC
Q: How to service the Speed Sensor on the Turbine Shaft on Ford Contour?
A:
A proper service of turbine shaft speed (TSS) sensor requires vehicle elevation and support with a drain pan positioned beneath the sensor location. Separate the electrical connector before removing the bolt in order to extract the TSS sensor. The sensor bore requires inspection before examining the O-ring seal for damage. If you find any signs of damage replace the O-ring. The O-ring seal needs a thin application of petroleum jelly before installing the new sensor. You must install the newly put-in TSS sensor after you re-attach its electrical connector. Remove the drain pan then position the vehicle into lower position after installation. Add new transmission fluid either from Motorcraft Mercon (R) Multipurpose automatic transmission fluid or an equivalent product with Mercon (R) specifications when checking and verifying the transmission fluid level. Before finishing the procedure start the engine while moving the transaxle range selector lever through its complete gear range.